User manual TOSHIBA MT500

[. . . ] OWNER'S MANUAL DATA PROJECTOR TDP-MT500 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] · When EXIT button of the remote controller is pressed, the display returns to the menu of the previous level. 3 Press ENTER button. The desired menu (the second level) appears. INSTALLATION. . . LANGUAGE RGB & COMPONENT MIRROR KEYSTONE PATTERN 4 Select the menu to be revealed by pressing { , } buttons. INTTALLATION. . . LANGUAGE RGB & COMPONENT MIRROR KEYSTONE PATTERN 5 Press ENTER button. The desired menu (the third level) appears. INSTALLATION. . . KEYSTONE KEYSTONE 0 28 SETTING WITH MENUS Items that can be set with menus In this projector, the following items can be set by revealing setup menus. CONTRAST BRIGHTNESS COLOR TINT SHARPNESS 0 0 0 0 0 ITEM SETTING FUNCTION CONTRAST ------- -32 ­ +31 ---------- Adjusts contrast of projected images. (See Page 28. ) BRIGHTNESS ---- -30 ­ +30 ---------- Adjusts brightness of projected images. (See Page 28. ) COLOR ------------- -30 ­ +30 ---------- Adjusts color thickness of projected images. (See Page 28. ) TINT --------------- -15 ­ +15 ---------- Adjusts tint of projected images. (See Page 28. ) SHARPNESS ----- -10 ­ +10 ---------- Adjusts sharpness of projected images. (See Page 28. ) ITEM SETTING FUNCTION ICC CONTROL ---------------------------- Emphasizes or de-emphasizes independently each of four colors, RED, GREEN, BLUE and YELLOW. COLOR TEMP ----------------------------- Selects one of preset color temperatures. SET USER COLOR TEMP ------------- Selects one of color temperatures that are set in "Color temperature user adjustment". (See Page 29. ) GAMMA ------------------------------------- Adjusts favorable color temperatures and stores them. (See Page 29. ) DISPLAY MENU ITEM --------------- SETTING ---------- FUNCTION Select when viewing picture images from a video equipment connected to VIDEO terminal. Select when viewing picture images from a video equipment connected to S-VIDEO terminal. Select when viewing picture images from a video equipment connected to COMPONENT1 terminal. Select when viewing picture images from a video equipment connected to COMPONENT2 terminal. Select when viewing picture images from a digital equipment connected to DVI terminal. Select when viewing picture images from an analog equipment connected to DVI terminal. Sets picture images to be projected to an aspect ratio of 16: 9. [. . . ] Consult the delivery agent of the projector about the details of the installation work. · If the projector is damaged by using any other suspension bracket than the dedicated one or due to any problem of the environment in which the suspension metal bracket is installed, Mitsubishi Electric Corporation will not compensate the damage even if the product is still under warranty. In the case of installing the projector so that the picture images are projected onto a semitransparent screen and viewed them from the rear side of the screen: When installing the projector, be sure to ask a special worker who received training of the installation work. Consult the delivery agent of the projector about the details of the installation work. Screen Projector Projector Screen · When viewing projected images from the rear side of the screen, set the projection method in the setting menu to "Rear". Refer to Page 27 for the detail. · In the case of the suspension from ceiling, set the projection method in the setting menu to "Ceiling suspension". · Ask the installation worker to provide a power breaker for the projector. [. . . ]