User manual TOSHIBA MW24FP3

[. . . ] Introduction DIGITAL VIDEO 2 Connections COMBINATION FLAT COLOR TELEVISION AND VIDEO CASSETTE RECORDER / DVD VIDEO PLAYER 13 Basic setup 18 TV operation 23 MW20FP3 MW24FP3 OWNER'S MANUAL Playback (VCR) 33 Recording (VCR) 38 Other functions (VCR) 42 Basic playback (DVD) 44 Advanced playback (DVD) 47 Function setup (DVD) 53 Others 57 Illustration of MW20FP3 ©2004 Toshiba Corporation This device does not tape-record copy protected DVD video discs. 5L00301C [E]Cover 1 20/4/04, 16:11 Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press it again to return to the stereo sound. CH 013 STEREO 1 2 3 Press MENU, then press option. or to select MENU ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE SETUP / / / / MENU Press or to select "AUDIO", then press . ENTER LANGUAGE/ IDIOMA/LANGUE PICTURE AUDIO PICTURE PREFERENCE / / / MENU Press or to select the item you want to or to adjust the adjust, then press setting. ENTER Listening to SAP (Second Audio Program) When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the Second Audio Program broadcasting is available. CH 013 STEREO SAP BASSCONTRAST TREBLE BALANCE SURROUND STABLE SOUND SAP / / / 0 0 0 OFF OFF OFF / CANCEL / MENU Press or to adjust the bass sound. Press or to obtain an equal sound level from both speakers. SURROUND: Press or to select "ON" or "OFF". ON: The dynamic presence and sound created offers a thoroughly enjoyable listening experience. or to select "ON" or "OFF". STABLE SOUND : Press ON: The Stable Sound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed. SAP : Press or to select "ON" or "OFF". OFF: SAP is not available. BASS: TREBLE: BALANCE: To select desired sound Press AUDIO SELECT to select the desired sound. AUDIO SELECT STEREO Broadcast MONO STEREO MONO+SAP STEREO+SAP 4 32 After your desired setting press MENU repeatedly until the menu screen is cleared. MENU SETUP 3 To return BASS/TREBLE/BALANCE control adjustments to the factory preset levels Press CANCEL while making sound adjustments. SAP setting OFF ON OFF ON OFF ON OFF ON Audio display MONO MONO STEREO MONO STEREO MONO MONO SAP STEREO MONO SAP 5L00301C [E]p27-32 32 20/4/04, 16:14 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Erase prevention tab Automatic power ON When you insert a cassette tape the unit power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Unloading Playback (VCR) 1 Press STOP/EJECT on the front panel. 2 Remove the cassette tape. Automatic tape eject This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically. Notes: · Always eject the tape when not in use. · The cassette tape can be ejected even if the POWER is "OFF". To prevent accidental erasure To prevent accidental erasure Remove the erase prevention tab with a screwdriver. Screwdriver To record again Cover the hole with a piece of adhesive tape. Erase prevention tab Adhesive tape Tape speed and maximum recording time Tape Speed SP (Standard Play) SLP (Super Long Play) Video cassette tape T-160 2-2/3 hours 8 hours T-120 2 hours 6 hours T-90 1-1/2 hours 4-1/2 hours T-60 1 hour 3 hours T-30 30 minutes 1-1/2 hours 33 5L00301C [E]p33-37 33 20/4/04, 16:14 Playback (VCR) TV/VCR Cassette tape playback To play a prerecorded tape. REV PLAY FWD STOP REW FF Illustration of MW20FP3 PLAY STOP/EJECT Playback Rewind or forward the tape Stop the playback or recording with STOP. To rewind the tape: Press REW on the front panel or press REV on the remote. 1 Load a prerecorded tape: (When loading a cassette tape without the erase prevention tab, playback will start automatically). REV 2 To start playback: Press PLAY on the front panel or on the remote. " " will appear on the screen for about 4 seconds. To forward the tape: Press FF on the front panel or press FWD on the remote. PLAY FWD To stop playback: Press STOP/EJECT once on the front panel or press STOP on the remote. The tape will stop but remain fully loaded and ready to play. " will appear on the screen for " about 4 seconds. To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY. Forward/Reverse picture search mode When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REV or FWD again and hold it down. The unit will resume the tape winding as soon as the button is released. STOP Notes: · If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button. [. . . ] You are responsible for all charges involved in the replacement. You are responsible for all transportation and insurance charges for the set to and from the Service Station. Rental Units The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. You should complete and mail the enclosed Demographic card within ten days after you, or the person who has given you this product as a gift, purchased this product. This is one way to enable TACP to provide you with better customer service and improved products. [. . . ]