User manual TOSHIBA NB250

[. . . ] Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; Stylistic is a registered trademark of Fujitsu Computer Systems Corporation. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PCMCIA is a registered trademarks of the Personal Computer Memory Card International Association. PRISM is a registered trademark of GlobeSpan Virata, Inc. All other products are trademarks or registered trademarks of their respective companies. Warning Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. [. . . ] Close the [Network and Dial-up Connection] window. Use five or thirteen characters to enter the key in the ASCII character code format. The characters that can be used as the "network key" are as follows: 0 - 9, A - Z, _ (underscore), or, Use 10 or 26 characters to enter the key in the hexadecimal character code format. The characters that can be used as the "network key" in this case are as follows: 0- 9, A - F, a - f For ad hoc connection: Assign the same network key to all the personal computers to be connected. For access point (infrastructure) connection: Assign the identical network key that is programmed into the access point. For this setting, refer to the access point manual or contact your network administrator. Following this operation, confirm the names of the computer and the workgroup as follows. Click Start -> Settings -> Control Panel. The [System Properties] window will be displayed. Confirm the settings of [Device name:] and [Device Description:]. The setting of [Device name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. Enter the desired name in less than 15 ASCII character code format. Do not attempt to service the computer yourself. Always follow installation and operation instructions closely. If you accidentally spill liquid on your tablet: 1. Position it so that the liquid can run out. Let it dry out for 24 hours, or longer if needed. If your tablet will not boot up after it has dried out, call your support representative. Do not use your tablet in a wet environment (e. g. , near a bathtub or swimming pool). Always use the AC adapter and batteries that are approved for your system. Avoid exposure to sand, dust and other environmental hazards. Do not expose your tablet to direct sunlight for long periods of time as excessive temperatures may damage your system. Do not put heavy or sharp objects on the computer. [. . . ] When the date and time have been set, the restore tool starts. Starting restoration: Automatic restoration for the application program and operating environment is executed 5. Completing restoration: When application has been restored, the this device is automatically restarted. After restart, the application program is started as the startup application. APPLICATION BACKUP AND RESTORATION If memory has been erased CT2000 CE Tablet is designed so that it normally operates with battery power. [. . . ]