User manual TOSHIBA PORTEGE R700

[. . . ] Intel and Pentium are registered trademarks and Centrino is a trademark of Intel Corporation or its subsidiaries in the United States and other countries. The following are registered trademarks of IBM Corporation: IBM, IBM PC AT, IBM PS/2. The following are registered trademarks of Microsoft Corporation: MS, MS-DOS, Windows. PCMCIA is a trademark of the Personal Computer Memory Card International Association. [. . . ] Encryption Type Displays the encryption type currently used by the radio. IP Address Displays the current TCP/IP address assigned to the WLAN adapter. Country The country with the country code for which the radio is configured. 57 5. Confirming the status of the radio Intel PROSet Wireless LAN: 1. Click [Start] -> [All Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The [Intel(R) PROSet] window will be displayed. Click the [General] tab and confirm radio status in the window displayed. The current connection status will be displayed. 2. Signal Quality The quality of the signals is displayed on a graph. Network name (SSID) The connected network name (SSID) is displayed. Profile name "<No profile>" is displayed. Mode If access point (infrastructure) connection is in use, "Infrastructure (AP)" will be displayed. If ad P5020. book Page 58 Friday, September 12, 2003 4:43 PM LifeBook P5000 Notebook Section Five Transmit Power Level Displays the current transmit power level of the radio. Network Name (SSID) Displays the Network Name (SSID) currently used by the radio. Enter the information required for connection to the wireless LAN: Specify TCP/IP as the protocol, and confirm the name of the work group and other settings. Enter the data required for file/printer sharing on the network. For access point (infrastructure) connection, enter data for the access point. Refer to the manual of the access point for further details. Verify that you have been able to connect your computer to the network. 2. 4. PREPARATION FOR WIRELESS LAN CONNECTION This section explains the preparation (parameter assignment) required for the use of the wireless LAN. Assigning parameters Enter the network name (SSID), the network key, and other data required for wireless LAN connection. If there is the administrator of the network, contact the network administrator for data settings. Enter data in [Profile name] Enter the name of the system file for saving the parameter information that you are going to enter. Enter the desired character string consisting of less than 41 ASCII characters. Also, multiple [Profile] items can be created covering both ad hoc connection and access point (infrastructure) connection. When there are multiple wireless LANs to which your persona computer is to be connected, each LAN can be accessed by selective use of the profiles. [. . . ] A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. UL Underwriters Laboratories ­ An independent organization that tests and certifies the electrical safety of devices. An external bus standard that allows for fast data transfer. A single USB port can be used to connect up to 127 peripheral devices, such as mice, modems, and scanners. [. . . ]