User manual TOSHIBA QF20

[. . . ] Qosmio F20 TOSHIBA Qosmio F20 Portable Personal Computer User's Manual Copyright © 2005 by TOSHIBA Corporation. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA Qosmio F20 Portable Personal Computer User's Manual First edition May 2005 Copyright authority for music, movies, computer programs, data bases and other intellectual property covered by copyright laws belongs to the author or to the copyright owner. [. . . ] Otherwise, it selects the internal LCD (Default). Selects both the internal LCD and external monitor for simultaneous display. If the connected external monitor does not support the selected SVGA mode, selecting the LCD + Analog RGB mode will not display on that monitor. When Windows starts up, the screen will be displayed on the external monitor if it was connected when the notebook was previously switched off and is still connected when the computer is switched on. Otherwise, the screen will be displayed on the internal LCD. 7-2 User's Manual HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select from the following settings: HDD -> FDD -> CD-ROM -> LAN FDD -> HDD -> CD-ROM -> LAN HDD -> CD-ROM -> LAN -> FDD FDD -> CD-ROM -> LAN -> HDD CD-ROM -> LAN -> HDD -> FDD CD-ROM -> LAN -> FDD -> HDD The computer looks for bootable files in the following order: HDD, floppy disk drive, CD-ROM and LAN. (Default) The computer looks for bootable files in the following order: floppy disk drive, HDD, CD-ROM and LAN. The computer looks for bootable files in the following order: HDD, CD-ROM, LAN and floppy disk drive. The computer looks for bootable files in the following order: floppy disk drive, CD-ROM, LAN and HDD. The computer looks for bootable files in the following order: CD-ROM, LAN, HDD, floppy disk drive. The computer looks for bootable files in the following order: CD-ROM, LAN, floppy disk drive and HDD. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: U N 1 C *1 Selects the USB floppy disk drive. Selects the CD-ROM*2. Floppy disk drive is looked for when the boot disk is contained in external floppy disk drive. this computer, CD-ROM refers to the Fixed optical media drive. *2 In User's Manual 7-3 HW Setup To change the boot device, follow the steps below. The following menu will be displayed with the following icons: Built-in HDD, CD-ROM, floppy disk drive, Network (LAN) boot. A bar will appear only under the selected device. Use the left/right cursor keys to highlight the boot device you want and press Enter. If a supervisor password is set only, it is the following. The menu above appears (able to run HW Setup). The menu above does not appear (unable to run HW Setup). If the supervisor and user password are set, it is the following. The menu above appears when you use the supervisor and user password to start the computer (able to run HW Setup). The menu above does not appear when you use the user password to start the computer (unable to run HW Setup). The menu above appears when you use the supervisor password to start the computer (unable to run HW Setup). The selection method above does not change the boot priority settings in HW Setup. [. . . ] SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. SD card: Secure Digital cards are flash memory widely used in a variety of digital devices such as digital cameras and Personal Digital Assistants. SECAM L: SECAM (Sequential Color Memory) is a broadcasting standard used in France. serial communications: A communications technique that uses as few as two interconnecting wires to send bits one after another. [. . . ]