User manual TOSHIBA RAS-07PAVP-E

[. . . ] OWNER'S MANUAL AIR CONDITIONER (SPLIT TYPE) For general public use ENGLISH EN Indoor Unit RAS-07PKVP-E RAS-10PKVP-E RAS-13PKVP-E RAS-16PKVP-E RAS-18PKVP-E RAS-07PKVP-ND RAS-10PKVP-ND RAS-13PKVP-ND RAS-16PKVP-ND RAS-18PKVP-ND Outdoor Unit RAS-07PAVP-E RAS-10PAVP-E RAS-13PAVP-E RAS-16PAVP-E RAS-18PAVP-E RAS-07PAVP-ND RAS-10PAVP-ND RAS-13PAVP-ND RAS-16PAVP-ND RAS-18PAVP-ND CONTENTS ENGLISH ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PRECAUTION FOR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 NAMES OF PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 NAMES AND FUNCTIONS OF INDICATORS AND CONTROLS ON INDOOR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Settings for SWING (louver swing), FIX (louver position), FAN (fan speed) and PURE (pure operation) can be changed during 8°C heating operation. Setting changes cannot be made with other buttons. · Temperature can be changed from 5°C to 13°C during 8°C heating operation. · The temperature of the blown air is lower than during normal heating operation. EN 12 PURE OPERATION Press this button to start the electrical air purifying operation. During air conditioner operation a PURE button PURE operation starts by pressing this button. · The PURE indicator (blue) on the display panel of the indoor unit turns on. · Plasma ion charger is activated. To stop only PURE operation PURE button PURE operation stops by pressing this button. · The PURE indicator (blue) on the display panel of the indoor unit turns off, while air conditioner is operating. · Plasma ion charger is deactivated. a To stop air conditioner operation at the same time button Air conditioner operation and PURE operation stop by pressing this button. · The OPERATION indicator (green) and PURE indicator (blue) on the display panel of the indoor unit turn off. CAUTION · When the button is pressed the next time, operation starts with the combined air conditioner and PURE operation. · During the combined air conditioner and PURE operation, air conditioner operation only cannot be stopped. When the air conditioner is stopped a PURE button PURE operation starts by pressing this button. · The PURE indicator (blue) on the display panel of the indoor unit turns on. INFORMATION · During PURE operation, a small amount of ozone is produced, and you might notice the smell. · When the fan speed is automatic, it changes up to MED+ . · During Hi POWER operation, the position of the vertical air flow louver changes to the high power position. Hi POWER OPERATION High power (Hi POWER) · The Hi POWER (high power operation) mode automatically controls room temperature, air flow and the operation mode so that the room is quickly cooled in summer and warmed in winter. ( see page 19. ) Setting Hi POWER mode a Hi POWER button Press the Hi POWER button. The Hi POWER mark on the remote controller is shown. Canceling Hi POWER mode a Hi POWER button Press the Hi POWER button once again. The Hi POWER mark on the remote controller turns off. CAUTION The Hi POWER mode cannot be activated during DRY operation. a 13 EN TIMER OPERATION ON timer and OFF timer Setting the ON Timer a ON ON button ON Press the ON button. Set the timer to the desired time. Each time the ON button is pressed, the time changes in ten minute increments. Holding down the ON button changes the time in one hour increments. b SET SET button Press the SET SET button to set the timer. The timer time is displayed, and the timer starts. c CLR CLR button Press the CLR CLR button to cancel the timer setting. Setting OFF Timer a OFF OFF button OFF Press the OFF button. b c a Set the timer to the desired time. Each time the OFF button is pressed, the time changes in ten minute increments. [. . . ] · When the power is turned on or the air conditioner is stopped, the vertical air flow louvers may make a rattling sound or shuttling sound. · Some parts may expand or shrink due to temperature fluctuations, and this can result in a slapping sound. · When the refrigerant is flowing, a hissing sound or gurgling sound can result. · A hissing sound can be made when the air conditioner is switched to defrosting operation during heating operation. [. . . ]