User manual TOSHIBA RBC-AMT31E

[. . . ] OWNERS MANUAL MANUEL DU PROPRIETAIRE BETRIEBSANLEITUNG MANUALE DEL PROPRIETARIO MANUAL DEL PROPIETARIO MANUAL DO UTILIZADOR GEBRUIKSAANWIJZING WIRED STANDARD REMOTE CONTROLLER RBC-AMT31E Object Indoor Unit Super Modular Multi System/ Super Heat Recovery System <4-way Air Discharge Cassette Type> MMU-AP0091H, AP0121H, AP0151H, AP0181H, AP0241H, MMU-AP0271H, AP0301H, AP0361H, AP0481H, AP0561H <2-way Air Discharge Cassette Type> MMU-AP0071WH, AP0091WH, AP0121WH, AP0151WH, AP0181WH, AP0241WH, AP0271WH, MMU-AP0301WH MMU-AP0481WH (CHINA market only) <1-way Air Discharge Cassette Type> MMU-AP0071YH, AP0091YH, AP0121YH, AP0151SH, AP0181SH, AP0241SH <Concealed Duct Standard Type> MMD-AP0071BH, AP0091BH, AP0121BH, AP0151BH, AP0181BH, AP0241BH, AP0271BH, MMD-AP0301BH, AP0361BH, AP0481BH, AP0561BH <Concealed Duct High Static Pressure Type> MMD-AP0181H, AP0241H, AP0271H, AP0361H, AP0481H, AP0721H, AP0961H <Under Ceiling Type> MMC-AP0151H, AP0181H, AP0241H, AP0271H, AP0361H, AP0481H <High Wall Type> MMK-AP0071H, AP0072H, AP0091H, AP0092H, AP0121H, AP0122H, AP0151H, AP0181H, AP0241H <Floor Standing Cabinet Type> MML-AP0071H, AP0091H, AP0121H, AP0151H, AP0181H, AP0241H <Floor Standing Concealed Type> MML-AP0071BH, AP0091BH, AP0121BH, AP0151BH, AP0181BH, AP0241BH <Floor Standing Type> MMF-AP0151H, AP0181H, AP0241H, AP0271H, AP0361H, AP0481H, AP0561H For commercial use Pour usage commercial Nur fr gewerbliche Nutzung Per uso commerciale Para uso comercial Para uso comercial Voor commercieel gebruik Digital Inverter Air Conditioner <4-way Air Discharge Cassette Type> RAV-SM560UT-E, SM800UT-E, SM1100UT-E, SM1400UT-E RAV-SP1100UT-E (Super Digital Inverter) <Under Ceiling Type> RAV-SM561CT-E, SM801CT-E, SM1101CT-E, SM1401CT-E <Concealed Duct High Static Pressure Type> RAV-SM561BT-E, SM801BT-E, SM1101BT-E, SM1401BT-E CODE No. SET DATA SETTING TEST UNIT No. H R. C. No. TEMP. ON / OFF ADOPTION OF NEW REFRIGERANT This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional refrigerant R22 in order to prevent destruction of the ozone layer. CAUTION Before using the remote controller (RBC-AMT31E), please read this Owner's Manual. For installation except operation of the remote controller, refer to the Installation Manual attached to the air conditioner unit. To use this remote controller safely and correctly, read this Instruction Manual thoroughly before use for full understanding. After you read this manual, be sure to keep it so that one who uses the remote controller can read this manual anytime. [. . . ] (AUTO) (HIGH) (MED. ) (LOW) In the Concealed Duct High Static Pressure type models, [HIGH] only is displayed for the air speed. Filter display If "FILTER " is displayed, clean the air filter. TEST run display Displayed during a test run. 16 Mode select control display Displayed when pushing "Operation mode select " button while the operation mode is fixed to heating or cooling by the system manager of the air conditioner. Flap position display (for 4-Way Air Discharge Cassette Type and Under Ceiling Type model only) Displays flap position. 17 Central control display Displayed when using the remote controller together with the central control remote controller, etc. If Remote controller is prohibited at the flashes when operating centralcontrol side, ON / OFF SWING display Displayed during up/down movement of the flap. 10 11 Set up temperature display The selected set up temp. is displayed. , MODE , / buttons and Remote controller sensor display Displayed while the sensor of the remote controller is used. the change is not accepted. (The contents available to be set up on the remote controller differ according to the central control mode. For details, refer to Owner's Manual of the central control remote controller. ) 2 ENGLISH PARTS NAME OF REMOTE CONTROLLER Operation section Push each button to select a desired operation. This remote controller can operate the maximum 8 indoor units. The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing ON / OFF button only. 17 TEMP. ON / OFF 10 2 5 3 1 2 3 4 FILTER RESET TEST 8 9 4 6 TIMER SET TIME SET CL FAN SWING/FIX UNIT MODE VENT Air volume select button Selects the desired air volume mode. The Concealed Duct High Static Pressure type models cannot be operated. Timer set button TIMER SET button is used when the timer is set up. Check button The CHECK button is used for the check operation. During normal operation, do not use this button. Fan button FAN button is used when a fan which is sold on the market or etc. If is displayed on the remote controller when pushing the FAN button, a fan is not connected. Filter reset button Resets (Erases) "FILTER 7 Operation lamp Lamp is lit during the operation. Although it flashes when operating the protection device or abnormal time. button When the button is pushed, the operation starts, and it stops by pushing the button again. When the operation has stopped, the operation lamp and all the displays disappear. Operation select button Selects desired operation mode. Set up temperature button Adjusts the room temperature. Set the desired set temperature by pushing or . ON / OFF 8 9 10 5 6 " display. Wind direction and Swing UNIT : If the multiple indoor units are operated by only one remote controller, select the units when the air direction is adjusted. SWING/FIX : Set up the auto swing and angle of the flap. [. . . ] Do not move the horizontal flap directly with hands; otherwise a trouble is caused. Select direction of the horizontal flap using SWING/FIX switch on the remote controller. The horizontal flap does not stop immediately even if the switch is pushed. Adjusting the stop position, push the switch. Adjustment of air direction rightward/leftward To change the air outlet direction to right or left side, set the vertical flap inside of the horizontal flap to the desired direction. Setup of air direction and swinging Refer to description of "2-way Air Discharge Cassette Type". 9 Floor Standing Type Adjustment of air direction upward/downward [In Cooling operation] In cooling operation, move the flap with hands and use it with horizontal air outlet point so that the cold air diffuses in whole room. [In Heating operation (For Heat-pump model only)] In heating operation, move the flap with hands and use the horizontal flap with downward set point so that the hot air blows at the foot. Adjustment of air direction rightward/leftward [In case of using unsymmetrical air directions] Lift up the vertical flap lightly, direct it toward the desired direction, and lower it. [. . . ]