User manual TOSHIBA RD-100-KB

[. . . ] E2TE0BD_EN. book Page 1 Friday, March 5, 2010 4:49 PM Introduction Connections HDD & DVD VIDEO RECORDER RD100KB OWNER'S MANUAL Basic Setup / TV View Operation Recording Playback Editing Function Setup Others © 2010 Toshiba Corporation EN For Customer Use: Carefully read the Model No. located at the back of the unit and enter the information below. Retain this information for future reference. __________________________ 1 E2TE0BD_EN. book Page 2 Friday, March 5, 2010 4:49 PM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] · If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. · When dubbing from HDD to DVD or VR mode DVD-RW to HDD, recording mode will automatically be set to "High" whenever the conditions are met. Refer to "Recording Mode for Dubbing" on this page. · If the high speed dubbing is not available, the title will be dubbed in normal speed with the recording mode of the title. · If the title is recorded in other brand's DVD recorder, the title will be dubbed in normal speed with the recording mode that you set with [REC MODE]. · If there is not enough space left on the disc for high/normal speed dubbing with the title's recording mode, the title will be dubbed in normal speed with "Auto" mode. If there is not enough space left on the disc for normal speed dubbing with SLP mode, the title will be dubbed in normal speed with SLP mode until the space of the disc runs out. EN Note · During normal dubbing, you can watch the playback picture of the title being dubbed (the audio cannot be changed). During high speed dubbing, the playback picture will not appear. · When you dub an HDD title that has bilingual audio to video mode DVD-RW/-R or DVD+RW/+R disc, select an appropriate audio format in the "Bilingual Recording Audio" menu. Refer to "Setting Bilingual Recording Audio" on page 32. · In order to dub a DVD recorded with the NTSC, set the "TV System" to "PAL". Refer to " TV System (Default: PAL) (DVD only)" on page 69. · If you stop the dubbing halfway, the contents will be dubbed up to where you stop the dubbing (except for the high speed dubbing). With high speed dubbing, nothing will be dubbed if you stop it halfway. Others Others 41 E2TE0BD_EN. book Page 42 Friday, March 5, 2010 4:49 PM One-Title Dubbing Video VR 3 DVD-R Select your desired dubbing direction using [K \ L], then press [ENTER\OK]. e. g. ) HDD A DVD Dubbing HDD DVD DVD HDD HDD DVD-RW DVD-RW DVD+RW DVD+R This function lets you select one specific title from the title list for dubbing. If you want to dub a title in the HDD, press [HDD] first. If you want to dub a title in a disc, press [DVD] first. 1 2 3 Press [TOP MENU]. Select a desired title to be dubbed using [K \ L \ 0 \ 1], then press [ENTER\OK]. Select "Dubbing" using [K \ L], then press [ENTER\OK]. e. g. ) HDD Original Resume Playback Play From Start Edit Title Delete Add to Playlist Delete Multiple Titles Dubbing 4 Select "Add" using [K \ L], then press [ENTER\OK]. HDD DVD 3000 MB Dubbing List Add Delete All Dubbing Start 1/1 4 Select "Yes" using [K \ L], then press [ENTER\OK]. Start Dubbing?Yes No · If you have registered any dubbing before, they will be listed in the dubbing title list. 5 Select a desired title using [K \ L \ 0 \ 1], then press [ENTER\OK]. The title is now registered in the dubbing list. To cancel selected title: Select a title using [K \ L \ 0 \ 1], then press [ENTER\OK] again. Dubbing of the selected title will start. To stop the dubbing in progress: Press [C STOP] on the front panel. Press [STOP C] for 2 seconds on the remote control. Selected Title Dubbing Video VR 6 DVD-R Repeat step 5 until you register all the titles to be dubbed, then press [DUBBING]. e. g. ) HDD ORG HDD DVD+RW DVD-RW DVD+R DVD-RW Title List 22 SP 17/ 05/ 10 07:00 22 SP 07:00 (00:30:00) 17/05/10 1 2 In stop mode, press [SETUP]. [. . . ] DVD-RW/-R disc on which the number of (See page 58. ) recorded titles has reached the maximum (99). · You are trying to record onto the VR mode DVD-RW disc on which the number of recorded chapters has reached the maximum (999). · You are trying to record onto the DVD+RW/+R disc on which the number of recording titles comes up to the maximum (49). · You are trying to record onto the DVD+RW disc on which the number of recording chapters comes up to the maximum (254). [. . . ]