User manual TOSHIBA SATELLITE 1400-203

[. . . ] TOSHIBA AMERICA INFORMATION SYSTEMS, INC. ("TOSHIBA"), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. Protection of Stored Data For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. [. . . ] Press the PC Card eject button once to extend it, and push it in to remove the PC Card. The PC Card ejects slightly from the slot. 3 Grasp the edges of the PC Card and slide it out of the slot. 140 Exploring Your Computer's Features Using an ExpressCardTM PC Card eject button Sample removing a PC Card Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer. To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online help. Using an ExpressCardTM (Available on certain models) The ExpressCard slot (available on certain models) supports the use of ExpressCard media. The slot also supports hot swapping, which allows you to replace one ExpressCard with another while the computer is on. Inserting an ExpressCard Before you insert an ExpressCard, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert an ExpressCard: 1 2 Locate the ExpressCard slot just above the PC Card slot on the left side of the computer. Insert the ExpressCard. Exploring Your Computer's Features Using an ExpressCardTM 141 Sample inserting an ExpressCard 3 When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later. If the card can be removed now, the system displays Safe To Remove Hardware. With Fn-esse, you can assign an Fn key combination to: Open a Windows® operating system program. Display a customized folder of programs and/or files from which to choose. Fn-esse also has several keys, known as hot keys, that perform preassigned operations. For more information, see "Hot Keys" on page 217. You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse® Click Start, point to All Programs, Toshiba, Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window Toshiba Utilities Fn-esse® 147 The keys are color-coded as follows: Available keys are dark gray with white letters. Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. Unavailable keys are light gray. There are two ways to assign a key to open a program or document: Using drag-and-drop Using the keyboard or pointing device The method most often used is drag-and-drop. Using drag-and-drop to assign a key To assign a key to a program or document: 1 2 3 4 Start both Fn-esse and Windows® Explorer (or the program supporting drag-and-drop). Resize the Explorer window so that you can see both the Fn-esse keyboard and Explorer at the same time. In the Explorer window, highlight the program or document file you wish to assign to a key. Click and hold the primary button as you drag the highlighted item from Explorer to the key on the Fn-esse keyboard to which you want to assign it. Fn-esse displays the Add/Edit Command dialog box with the Description, Command Line, and Working Directory fields automatically completed. [. . . ] For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically. To reset the computer by reloading the operating system without turning the computer off. RJ-11 -- A modular connector used on most U. S. [. . . ]