User manual TOSHIBA SATELLITE A10

[. . . ] These copyrighted materials may be copied for private use at home only. If, beyond the limitation above, you copy (including to transform data formats) or modify these materials, transfer them or distribute them via the Internet without approval of copyright owners, you may be subject to claims for compensation for damage and/or criminal penalties due to infringements of copyrights or personal rights. Please remember to observe the copyright laws when you use this product to copy the copyrighted works or perform other actions. Please note that you may infringe the owner's rights protected by the copyright laws if you use the screen mode switching functions (e. g. [. . . ] Do not use any discs that have been formatted with packet writing software other than TOSHIBA Direct Disc Writer. Similarly, do not use any discs that have been formatted with TOSHIBA Direct Disc Writer with any packet writing software other than TOSHIBA Direct Disc Writer. When using a disc you are not familiar with, format it by selecting Full Format before using it. Do not use the Cut & Paste function for files and folders. A file or folder that has been cut may be lost if writing fails due to an error on the disc. When writing the Setup files for the program into a disc formatted by TOSHIBA Direct Disc Writer and starting Setup from this disc, an error may occur. In this case, plase copy them to your hard disc and then run Setup. When Using WinDVD Creator 2 Platinum You can record video back to your digital camcorder via i. LINK (IEEE1394a) using WinDVD Creator Platinum. However, in some instances you may find that the playback sound is 'choppy' - if this is the case perform the following steps: 1. Click the Windows® Start button and select the Control Panel option. Click the Performance and Maintenance icon in the Control Panel. Click the System icon in the Performance and Maintenance window. Do not enter standby/hibernation mode while using WinDVD Creator. Do not operate WinDVD Creator immediately after turning on the computer, you should ensure you wait until all disc/disc drive activity has stopped. When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data. CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD functions are not supported in this version. User's Manual 4-20 Operating Basics While recording video to DVD or tape, please close all other programs. Do not run software like a screen saver because it can put a heavy load on the CPU. Do not run communication applications like a modem or a LAN. Before recording the video to DVD When you record to DVD media, please use only discs recommended by the drive manufacturer. Do not set the working drive to be a slow device like a USB 1. 1 hard disc drive or it will fail to write the DVD. Do not perform any of the following actions: Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. Bump or cause vibration to the computer. Use either the mode button or the audio/video control buttons to reproduce music or voice. [. . . ] Applying a voltage between the glass sheets alters the brightness of the liquid crystal. 1) A technology that allows the inclusion of up to 100, 000 simple logic gates on a single chip. 2) An integrated circuit that uses large scale integration. M megabyte (MB): A unit of data storage equal to 1024 kilobytes. mode: A method of operation, for example, the boot mode, standby mode or the hibernation mode. [. . . ]