User manual TOSHIBA SATELLITE A200 (PSAE6)

[. . . ] Copyrighted material can be reproduced only for personal use or use within the home. Any other use beyond that stipulated above (including conversion to digital format, alteration, transfer of copied material and distribution on a network) without the permission of the copyright owner is a violation of copyright or author's rights and is subject to civil damages or criminal action. Please comply with copyright laws in making any reproduction from this manual. Disclaimer This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA Satellite A500/A500D Portable Personal Computers at the time of this manual's production. [. . . ] While playing a BD-J title, resume play is ineffective. Media care This section provides tips on protecting data stored on your CD's, DVD's, BD's and floppy diskettes. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it. CD/DVDs 1. Store your CD's, DVD's and BD's in the containers they originally came in to protect them and keep them clean. Do not bend the CD's, DVD's or BD's. User's Manual 4-31 Satellite A500/A500D 3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD, DVD or BD that contains the data. Hold the CD, DVD or BD by its outside edge or the edge on the center hole - any fingerprints on the surface of the disc can prevent the drive from properly reading data. Do not expose the CD, DVD or BD to direct sunlight, extreme heat or cold. Do not place heavy objects on your CD's, DVD's or BD's. If your CD's, DVD's or BD's become dusty or dirty, wipe them with a clean dry cloth from the center hole outwards - do not wipe in a circular direction. If necessary, you can use a cloth that has been lightly dampened in water or a neutral cleaner but you must not use benzine, thinner or any similar cleaning solution. Floppy diskettes The USB floppy diskette drive is available only as an option. Store your floppy diskettes in the container they came in to protect them and keep them clean. The Windows Sounds is always displayed since it controls the system sounds' volume. Changing System Sounds System sounds are assigned to inform you when certain events happen. This section explains how select an existing scheme or save one you have modified. To launch the configuration dialog window for system sounds, follow the steps below. Right-click the Speaker icon on the task tray. Select Sounds from the menu. Realtek HD Audio Manager You can confirm and change the audio configuration using the Realtek Audio Manager. To launch the Realtek Audio Manager, click Start -> Control Panel -> Hardware and Sound -> Realtek HD Audio Manager. When you first launch the Realtek Audio Manager, you will see following device tabs. To change the default device, click the Set Default Device button under the chosen device tab. Select it when using the internal speakers or headphones. Digital Output should be selected when connecting the optical cable to the Headphone (S/PDIF) jack for playing digital sound on digital audio equipment. Digital Output can only be used by connecting an optical audio cable. [. . . ] For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically restart: Resetting a computer without turning it off (also called "warm boot", "soft reset" or "reboot"). A device that uses three input signals, each activating an electron gun for a primary additive color (red, green and blue) or port for using such a device. Read Only Memory (ROM): Non-volatile memory that can be read but not written to. [. . . ]