User manual TOSHIBA SATELLITE R10

[. . . ] Copyrighted material can be reproduced only for personal use or use within the home. Any other use beyond that stipulated above (including conversion to digital format, alteration, transfer of copied material and distribution on a network) without the permission of the copyright owner is a violation of copyright or author's rights and is subject to civil damages or criminal action. Please comply with copyright laws in making any reproduction from this manual. Disclaimer This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA L550/L555/L550D/L555D Portable Personal Computers at the time of this manual's production. [. . . ] To select a region, follow the steps as detailed below: 1. Click Start -> All Programs -> TOSHIBA -> Networking -> Modem Region Select. If it is available, do not use the Country/Region Select function included as part of the modem setup utility within the Control Panel - if you change the country/region setting this way you may find that the change does not take effect. The Region Selection icon will appear in the Windows Taskbar. Click the icon with the primary (left) mouse button to display a list of regions that the modem supports, together with a sub-menu which details telephony location information - a check mark will appear next to the currently selected region and telephony location. Select either a region from the region menu or a telephony location from the sub-menu. When you click a region it becomes the modem's default selection for any new dialing locations that are created within the Windows Control Panel (Phone and Modem Options). When you select a telephony location, the corresponding region is automatically selected and becomes the modem's default setting. Properties menu Click the icon with the secondary (right) mouse button in order to display a Properties menu on the screen. Setting Within the Properties menu you are able to either enable or disable the following settings: AutoRun Mode Allows you to configure whether the Modem Region Select utility starts automatically whenever you start up the operating system. Open the Dialing Properties dialog box after selecting region Allows you to configure whether the dialing properties dialog box will be displayed automatically after you have selected a region. User's Manual 4-25 L550/L555/L550D/L555D Location list for region selection Displays a sub-menu appears which details location information. Open dialog box, if the modem and Telephony Current Location region code do not match Displays a warning if the current settings for both region code and telephony location are different. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed from which you should select the appropriate communications port for your modem to use. Dialing Properties You should select this item in order to display the dialing properties. If you are using the computer in Japan, the Telecommunications Business Law requires that you select Japan region mode. It is illegal to use the modem in Japan with any other selection. Connecting the modular cable Connection to any communication line other than an analog phone line could cause a computer system failure. Connect the built-in modem only to ordinary analog phone lines. This Bluetooth Stack is based on the Bluetooth Version 2. 1+EDR specification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers. Release Notes related to the Bluetooth® Stack for Windows® by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this BluetoothTM Stack. Multi-user considerations: On Windows® 7, the use of Bluetooth is not supported in a multi-user environment. This means that, when you use Bluetooth, other users that are logged into the same computer will not be able to use this type of functionality. Product Support: The latest information regarding operating system support, language support or available upgrades can be found on our website http://www. toshiba-europe. com/computers/tnt/bluetooth. htm in Europe or http://www. pcsupport. toshiba. com in the United States. Wireless communication indicator The wireless communication indicator shows the status of the computer's wireless communication functions. Indicator status Indicator off Indicator glows Indication No wireless functionality is available. Wireless LAN or Bluetooth is turned on by an application. If you used the Taskbar to disable the wireless LAN, restart the computer or perform the following procedure to re-enable it: Click Start, open Control Panel, click System and Security, click Device Manager on System category, double-click Network Adapters, and right click the wireless device then choose Enable. User's Manual 4-29 L550/L555/L550D/L555D Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi or Bluetooth operation. Turn Wi-Fi and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any Wi-Fi or Bluetooth functionality. [. . . ] For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically restart: Resetting a computer without turning it off (also called "warm boot", "soft reset" or "reboot"). A device that uses three input signals, each activating an electron gun for a primary additive color (red, green and blue) or port for using such a device. Read Only Memory (ROM): Non-volatile memory that can be read but not written to. [. . . ]