User manual TOSHIBA SATELLITE 2060CDS FIELD REPLACEABLE UNIT DOCUMENTATION

[. . . ] The following are registered trademarks of Microsoft Corporation: MS, MS-DOS, Windows. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Adobe Acrobat Reader is a registered trademark of Adobe System Inc. [. . . ] For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. 8. Processing will return to the [Wireless Network Connection Properties] window. Close the [Network Connection] window. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing function is to be used. 57 LifeBook C Series Notebook - Section Five The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. 3. Right-click the "work" folder (or whichever folder you want to share), and then click [Sharing and Security. . . ] in the menu displayed. The [Folder Name Properties] window will be displayed. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the filesharing function easily without using Network Setup Wizard are given below. Setting the Microsoft network-sharing service 1. Click the [Start] button first and then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. A list of currently installed networks will be displayed. Setting the file-sharing function The procedure for setting the file-sharing function follows, with the "work" folder in drive C: as an example. Click the [Start] button first and then [My Computer]. Double-click [Local disk (C:)]. 58 W I r e l e s s L A N U s e r 's G u id e 3. Enter the sharing printer name in [Share name]. Click the [OK] button. Current Mode Indicates the frequency and data rate currently used by the radio. Current Channel The channel number currently used by the radio. Link Status Displays the current connected state of the WLAN module. Encryption Type Displays the encryption type currently used by the radio. IP Address Displays the current TCP/IP address assigned to the WLAN adapter. Country The country with the country code for which the radio is configured. Transmit Power Level Displays the current transmit power level of the radio. [. . . ] Your LifeBook notebook uses various suspension states to reduce power consumption and prolong the charge of your battery. Standard that provides 800x600 pixel resolution and a palette of 16M colors. A component video system for driving a TV or computer monitor. Glossary System Clock An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted to provide time of day and date. TFT Thin Film Transistor ­ A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. [. . . ]