User manual TOSHIBA SATELLITE 220 FIELD REPLACEABLE UNIT DOCUMENTATION

[. . . ] The following are registered trademarks of Microsoft Corporation: MS, MS-DOS, Windows. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Adobe Acrobat Reader is a registered trademark of Adobe System Inc. [. . . ] Please contact your network administrator if configuration of this setting is required. Please contact your network administrator if configuration of this setting is required. After selecting your authentication type, click the Configure button to open the Settings dialog. Enter the user name and password of the user you have created on the authentication server. The user name and password do not have to be the same as name and password of your current Windows user login. The "Server Identity" can be use the default setting. The "Client Certificate" should be the one 57 LifeBook C Series Notebook - Section Five CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the "Setting TCP/IP" and "Confirming the computer and work group names" operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. 1. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. 7. For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and [Subnet mask]. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. 8. Processing will return to the [Wireless Network Connection Properties] window. Close the [Network Connection] window. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. 58 W I r e l e s s L A N U s e r 's G u i d e This operation is not required unless the sharing function is to be used. The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. To share a file and/or the connected printer, you need to be logged in as an administrator. 2. Right-click the "work" folder (or whichever folder you want to share), and then click [Sharing and Security. . . ] in the menu displayed. The [Folder Name Properties] window will be displayed. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the filesharing function easily without using Network Setup Wizard are given below. Setting the Microsoft network-sharing service 1. Click the [Start] button first and then [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. [. . . ] A computer architecture that uses graphics chips on the motherboard that use part of the main memory for video memory. The USB 2. 0 specification is a peripheral bus standard for connecting external devices at up to 480 Mbps. Some features of the standard include support for up to 127 concurrent USB devices, dynamic insertion and removal of devices, and self-identifying peripheral configuration for true plug-and-play functionality. USB 1. 0 connects external devices at up to 11 Mbps. [. . . ]