User manual TOSHIBA SATELLITE P845T

[. . . ] Sony does not support third party applications. If you are having problems with a third party application, please contact the publisher of that application. 2 Making backups of data and applications on your CLIÉ handheld Sony recommends that you make a backup of your data in case of unexpected Troubleshooting problems. Backing up your data will ensure that it can be restored again on your CLIÉ handheld, even if you have to perform a hard reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Making a backup using Memory Stick Backup Use "Memory Stick" media and Memory Stick Backup on your CLIÉ handheld to back up data and applications on your CLIÉ handheld. b "Memory Stick" media (sold separately) is required. For details, refer to "Backing up your CLIÉTM handheld data and applications: Backing up data and applications to "Memory Stick" media using Memory Stick Backup" in the "Handbook" (PDF format). Making a backup using the HotSync® operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data and installed applications on your CLIÉ handheld are backed up to your computer when the HotSync® operation is performed. If you need to perform a hard reset, this would erase all user data and applications stored on your CLIÉ handheld. [. . . ] Check the connection according to "I cannot connect to the Internet via a wireless LAN (for SATELLITE P845T only)" on page 29. I cannot perform a IR HotSync® operation B Check that the IR port of your computer is enabled. B The IR HotSync® operation is not available if your computer does not have an IR port. B Check that (HotSync) is displayed in the task tray (Notification area) at the bottom right of your computer window and HotSync Manager is running. When HotSync Manager is running, the shortcut menu should be displayed by clicking (HotSync). B If you are using Windows 2000 Professional/Windows XP, click (HotSync) in the task tray (Notification area) at the bottom right of your computer window and ensure [InfraRed] is selected. B If you are using Windows Me, click (HotSync) in the task tray (Notification area) at the bottom right of your computer window and ensure [Local Serial] is selected. 26 I cannot perform a IR HotSync® operation (continued) B If you are using Windows Me, click (HotSync) in the task tray (Notification area) at the bottom right of your computer window and click [Local] in the Setup window. Then ensure [Serial Port] of the simulated port for IR communication is selected. B Ensure [Local] and [IR to a PC/handheld] are selected in the HotSync screen on your CLIÉ handheld. B Point the IR port of your CLIÉ handheld directly at the IR port of your computer. The distance between the IR ports of your CLIÉ handheld and computer should be 4 to 8 inches (approximately 10 to 20 centimeters). The optimum distance for beaming may vary depending on devices. (The list can be reordered by tapping or . ) You can also select the profile name for the target wireless LAN access point instead of selecting [-Auto Connect-] from [Profile Name:] in order to explicitly connect to the target one. B The channel setting must be from channels 1-11 for the wireless LAN access point. Change the channel setting to an appropriate channel. b For details on setup, refer to the manual of the wireless LAN access point. Continued on next page ························· 29 I cannot connect to the Internet via a wireless LAN (for SATELLITE P845T only) (continued) B Your CLIÉ handheld and the wireless LAN access point may be too far away. You need to be closer to the wireless LAN access point when trying to connect to it. B SSID may be set to be hidden from the wireless LAN access point side. In such a case, your CLIÉ handheld cannot detect it via the scan operation. B The wireless LAN access point may not be connected to the Internet. Connect the wireless LAN access point to the Internet. b For connection details, refer to the manual of the wireless LAN access point. B The network settings may not be correct. [. . . ] However, new image file names are assigned automatically when you save the image files as JPEG format on "Memory Stick" media. 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Problems with the CLIE Launcher I cannot start the CLIE Launcher B When the Palm OS® Standard screen is displayed, select [Go To CLIE Launcher View] from [Options]. b For details, refer to "CLIÉTM handheld basic operations: Using the Palm OS® Standard screen" in the "Handbook" (PDF format). Troubleshooting B If there is insufficient memory space, the CLIE Launcher or applications may not be started. On the Palm OS® Standard screen, tap [Info. . . ] from [App] to check the free space of the memory. Then, tap [Delete. . . ] from [App] to delete unnecessary applications. Applications stored on "Memory Stick" media are not displayed B You can display only the applications stored in [Palm/Launcher] directory. [. . . ]