User manual TOSHIBA SATELLITE PRO C650

[. . . ] When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. Device control feature parameters, such as changing I/O addresses and boot devices Change the configuration of internal devices System security feature parameters, such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following: 1. Press the [F2] key once the Fujitsu logo appears on the screen. This will open the system information window of the BIOS Setup Utility with the current settings displayed. [. . . ] When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable the power button, the Wake Up On LAN feature, and system beep. Systems with Windows XP Media Center Edition also have a Wake Up On USB Device option. When selected, opens the event logging submenu. Internal Device Configurations CPU Features USB Features ___ ___ ___ Miscellaneous Configurations ___ Event Logging 8 ­-- Advance Menu Video Features Submenu of the Advance Menu The Video Features Submenu is for setting the display parameters. ITADVD-RAM UJ-831S Video Features Speed: L1 Cache: Configurations L2 Cache: Display : Auto x Compensation : Enabled FFFFh :: Clear Clear Is :Clear OK Cancel Memory Total: Figure 7. When Disabled is selected, XD Bit functionality is disabled. Disabled Enabled USB Features Submenu of the Advance Menu The USB Features Submenu provides options for enabling or disabling the USB devices. SHITADVD RAM UJ 831S USB Features s Configurations /xx Legacy USB Support: - SCSI SubClass Support: g FFFFh OK Cancel s: Clear Clear dI Cl Speed: L1 Cache: L2 Cache: Enabled Enabled Memory T l Figure 10. USB Features Submenu Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advance Menu Menu Field Legacy USB Support: Options Default [Enabled] Description When Enabled is selected, Legacy USB Emulation is enabled and the USB devices are available without a USB-aware OS. When Disabled is selected, Legacy USB support is disabled. When Enabled is selected, USB devices that belong to the SCSI subclass in the mass storage class (e. g. , USB Memory Key) are enabled. Note that enabling this feature may cause the system to hang during POST, depending on the device that is connected. Disabled Enabled SCSI SubClass Support: Disabled Enabled [Enabled] 10 Advance Menu Miscellaneous Configurations Submenu of the Advance Menu The Miscellaneous Configurations Submenu provides options for enabling or disabling the power button and the Wake Up On LAN feature, and for enabling or disabling the system beep. () Miscellaneous SHITADVD-RAM UJ-831S Configuration Speed: s L1 Cache us Configurations Disabled Power Button: L2 Cache Disabled Wake On LAN: x/xx Wake On USB Device: Disabled h - FFFFh ng Enabled System Beep: Memory Enabled Instant MyMedia: s: Clear Clear OK Cancel rd Is :Clear Total: Slot Sl t Figure 11. Miscellaneous Configurations Submenu Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advance Menu Menu Field Power Button: Options Default [Disabled] Description Selecting Disabled disables the power button. Selecting Power Off allows you to turn off system power with the power button. Selecting Enabled allows the system to wake up when the internal LAN device receives a specific signal while in power-off state. Sets, changes or cancels the User Password. The User Password may be up to eight characters long and must include only letters or numbers (no symbols). To cancel a password press the Enter key instead of entering characters in the Enter New User Password field and in the Verify New User Password field. When a User Password is set it must be used to access the BIOS setup utility. Supervisor can set password length (0 to 8) for user password. User cannot set a password shorter than the minimum length. When selected, a password (User or Supervisor) is required every time after the Power On Self Test (POST) before the operating system will be read from a disk. When unselected, no password is required. When unselected, it is not necessary to enter a password to wake up from LAN or Real Time Clock (RTC). When selected, it is still necessary to enter a password after automatic wake-up. When selected, the PS/2 mouse and keyboard inputs are locked out upon Resume from Suspend or Save to Disk mode until you enter the password. [. . . ] NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten, depending upon your operating environment. NOTE: Bootable USB drives and thumb drives will be listed under the Hard Disk Drive heading. Hard Disk Drive Sequence Submenu of the Boot Menu The Hard Disk Drive Sequence Submenu is for setting the order in which multiple hard disk drives are sequenced. __ Boot Disk Hard 424040M9AT00 Menu Drive SequenceIntel(R) __ Pre-Boot Execution Environment SHITADVD-RAM UJ-831S Speed: L1 Cache Boot Device Priority x TOSHIBA MK6026GAX L2 Cache xx/xx Hard Disk Drive Sequence 0h - FFFFh Memory s: rd Is: Clear Clear Clear OK Clear Figure 20. Hard Disk Drive Sequence Submenu Cancel Total: l Slot Slot Table 20: Fields, Options and Defaults for the Hard Disk Drive Sequence Submenu of the Boot Menu Menu Field Device Name . [. . . ]