User manual TOSHIBA SATELLITE R630

[. . . ] To return to a menu from a submenu, press the [Esc] key. To go to the Exit menu from any other menu, press the [Esc] key. POINT Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. s Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. POINT Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. [. . . ] [Auto] The port is configured depending on 'Plug & Play OS' setting. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 5. Serial/Parallel Port Configuration Submenu 13 LifeBook C Series BIOS Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu Menu Field Infrared Port: Options s s s Default [Enabled] Description Configures the infrared port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the infrared port is enabled this option is available allowing the user to set the mode for the infrared port. Allows user to set the infrared port I/O address when the infrared port is Enabled. Disabled Enabled Auto IrDA FIR 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 5 100 - 107 108 - 10F 110 - 117 118 - 11F DMA 1 DMA 3 Disabled Enabled Auto Output Only Bi-directional ECP Mode: s s [FIR] I/O Address: s s s s [2E8 - 2EF] Interrupt: s s s [IRQ 3] Allows user to set the infrared port interrupt when the infrared port is Enabled. I/O address: s s s s [118 - 11F] Allows user to set the infrared port I/O address when the infrared port is Enabled. DMA Channel: s s [DMA 3] Allows user to set the infrared port DMA Channel when the infrared port is Enabled. Configures the parallel port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the parallel port is enabled this option is available allowing the user to set the mode for the parallel port. Bi-directional allows two-way transfer of information between your notebook and a connected parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to the printer or similar device. ECP Mode allows communication with the ECP class of parallel I/O devices. Allows user to set the parallel port base I/O address when the parallel port is Enabled. Parallel Port: s s s [Enabled] Mode: s s s [Bi-directional] I/O address: s s s 378 - 37F 278 - 27F 3BC - 3BF IRQ 5 IRQ 7 [378 - 37F] Interrupt: s s [IRQ 7] Allows user to set the parallel port interrupt when the parallel port is Enabled. 14 Advanced Menu Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Keyboard/Mouse Features Numlock: Internal Pointing Device: [Off] [Manual Setting] Select power-on state for Numlock. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 6. Keyboard/Mouse Features Submenu Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Numlock: Options s s Default [Off] Description Sets the NumLock function state when the computer completes booting. When Auto is selected, the CPU speed is determined by the power source used. is selected, CPU speed is optimized for battery operation. When Disabled is selected, CPU speed is fixed to battery optimized speed. Enabled Disabled Auto Max. Disabled · · · · [Auto] 21 LifeBook C Series BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu configures the system for use with a USB floppy drive. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help ACPI Features USB Floppy Disk: [Disabled] [Disabled] Legacy Floppy Emulation is disabled. [Enabled] Legacy Floppy Emulation is enabled, and USB floppy is available without a USB-aware OS. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 12. USB Features Submenu Table 12: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field USB Floppy Disk: Options s s Default [Disabled] Description When Enabled is selected, Legacy Floppy Emulation is enabled and the USB floppy drive and bootable support are available without a USB-aware OS. When Disabled is selected, Legacy Floppy Emulation is disabled. Disabled Enabled 22 Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Event Logging Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read: Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter] Press <Enter> key to view the contents of the event log. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu v F9 Setup Defaults F10 Save and Exit Figure 13. Event Logging Submenu Table 13: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Event Log Capacity: Event Log Validity: View Event Log: Event Logging: s Options Default Space Available Description Display only Valid Enter Disabled Enabled Disabled Enabled No Yes Enter [Enter] [Enabled] Display only Allows you to view content of event log Turns event logging on and off for all DMI events. s s System Boot Event: Clear All Event Logs: Mark Events as Read: s s [Disabled] Turns event logging on and off for DMI system boot events. s s [No] When set to [Yes] all event logs will be cleared at next boot. s [Enter] Allows you to make all events currently in the event log as having been read. 23 LifeBook C Series BIOS SECURITY MENU ­ SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 3 for more information. ) The following tables show the names of the menu fields for the Security menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection. [. . . ] Boot Device Priority Submenu Table 20: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field +Floppy Disk Drive Options ­-- Default ­-- Description The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the BIOS setup utility. ­-- ­-- +Hard Disk Drive ATAPI CD-ROM Drive ­-- ­-- ­-- ­-- Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. [. . . ]