User manual TOSHIBA SD-24VB

[. . . ] DVD PLAYER & VIDEO CASSETTE RECORDER SD-24VBSB OWNER'S MANUAL Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. ©2004 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 1-6 Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] When this choice is made, this unit will pass each type of signal through without any further processing. DVD VCD2. 0 VCD1. 1 To select the black level of playback pictures. Set your preference and monitor's ability. On: Expanded grey scale. (0 IRE cut off) Off: Standard grey scale. (7. 5 IRE cut off) Pluge (Blacker than Black) DVD For proper adjustment of your television brightness settings utilizing a commercially available test disc. On: Select when you adjust the level of your TV using a commercially available test disc that contains pluge signals. Off: For normal use. Others The DRC, Vocal, PBC, Auto Play, B. L. E. , Pluge and DNR settings can be changed. Press v/V to select the desired item and press ENTER/OK. The setting of the selected item is changed between On and Off. Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio Output DNR (Digital Noise Reduction) DNR1: Normal level DNR2: Expanded level. Off: Off. DVD VCD2. 0 VCD1. 1 You can reduce ambient noise in the picture. Notes O O O O Others Actual picture enhancement may vary depending on the quality of the disc. While the DNR2 (expanded level) can provide additional improvement in the reduction of noise in the video signal, it may produce undesirable picture artifacts on some discs. Should this occur, select a more appropriate DNR level (normal or off). Depending on the disc, some picture detail may be lost by the picture enhancement. A DVD audio disc with Dolby Digital or DTS soundtrack may be played, some DVD audio discs include moving pictures which may be modified by the above processes. 1-25 Before Operation - DVD part (Continued) Parental Control Rating DVD Area Code DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Select "Rating" on the Setup menu using the v/V buttons. 1 Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio Output Code Set GB 1 Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio Output 8 7 6 5 4 3 2 1 Unlock Change Others Others 2 While "Rating" is selected, press B. not entered password yet; 3 Whenayou havepersonalusingathe numbered butEnter 4-digit password tons to create a 4-digit security password, then press ENTER/OK. Enter the 4-digit password again and press ENTER/OK to verify. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER/OK. If you make a mistake before pressing ENTER/OK, press CLEAR and enter 4-digit security password again. 2 While Area Code is selected, press B. 3 Follow step 3 of "Rating" on left. 4 Select the first character using the v/V buttons. cursor using 2 button and 5 Shift thecharacter using v/V buttons. select the second 6 Press ENTER/OK to confirm your Area code selection, then press SETUP to exit the menu. Note Confirmation of the 4-digit password is necessary when the password is changed (see "Changing the 4-digit Code" below ). Changing the 4-digit Code 1 Follow Steps 1-2 as shown above to the left (Rating). [. . . ] NICAM mode is not set properly. 1-41 Troubleshooting (Continued) Symptom The remote control does not work properly. Cause There is an obstacle in the path of the remote control and this unit. The batteries in the remote control are exhausted. The remote control is not pointed at the remote sensor of the DVD+VCR. [. . . ]