User manual TOSHIBA SD-3990

[. . . ] POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOUD. This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location-see service procedure. [. . . ] Doing so may cause the DVD video player to malfunction. Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children's fingers around the closing disc tray as there is a risk of personal injury. When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing. Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing. Video CD This contains recordings of pictures and sound whose quality is on a par with that of video tape. This player also supports Video CDs with playback control (Version 2. 0). If a Video CD has "playback control" written on its disc or jacket, it means that particular scenes or information can be selected for viewing interactively with the TV monitor using the menu screen. PAGE 20 BASIC OPERATION Basic Playback (Cont'd) Stopping Play Press STOP during playback. Resume Play G When play is stopped, the unit memorizes the point where STOP was pressed (RESUME function). Press PLAY and playback will resume from this point. Notes This operation works only with discs for which the elapsed playing time appears in the DVD display window during stop. Resume function will be cleared when the STOP is pressed on the STOP mode. You can repeat above procedure until desired picture quality appears. G Procedure of video mode is changed; Video1 Video2 Film Adapt Auto. G If you turn off the the power, the video mode will be back to initial state (Auto). Detailed Description of each Video Mode Auto : The image material types of the DVD video (film material or video material) are distinguished by this player based on the disc information. Video1 : Suitable for playing the disc of video material which has comparatively few movements. Video2 : Suitable for playing the disc of video material which has comparatively many movements. Film : Suitable for playing the disc of film material or of video material recorded by the progressive scan method. Adapt : Decides the material type (film or video) by playing the disc, and switches the modes. Suitable for playing the disc mixed of film and video material. BASIC OPERATION PAGE 23 Special Playback (Cont'd) You can play back discs at various speeds. To Scan at Fast Forward or Fast Reverse Playback. Press and hold SKIP or button for about two seconds during playback. [TV screen] FF X2 GG X2 SLOW (F V / V G) SKIP SKIP PLAY G The image advances (or reverses) is relatively slow at first. When the button is pressed again, the speed increases. (Each time the button is pressed, the speed increases up to 4 steps (DVD) or 3 steps (CD/Video CD). ) G The speed will be maintained even after the button is released. To return to normal playback, press PLAY. Note The DVD player does not play back sound during high speed reverse and forward playback of DVD video discs. However, the DVD player plays back sound during fast forward or fast reverse playback of audio CDs. [. . . ] Failure to return the card will not affect your rights under this warranty. Your Responsibility The above warranties are subject to the following conditions: (1) You must retain your bill of sale or provide other proof of purchase. (2) You must notify a TACP/THI/TCL /Authorized Service Station within thirty (30) days after you discover a defective product or part. (3) All warranty servicing of this product must be made by a TACP/THI/TCL Authorized Service Station. [. . . ]