User manual TOSHIBA SD-P1000

[. . . ] Introduction 2 Basic playback 14 DIGITAL VIDEO PORTABLE DVD PLAYER Advanced playback 24 SD-P1000 OWNER'S MANUAL Function setup 34 Connections 44 Others 52 © 2000 TOSHIBA CORPORATION AS XZ2029P005 Introduction SAFETY PRECAUTIONS CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location see service procedure. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] Follow steps 2 and 3. Notes · Some discs may not permit memory playback operation. · If you press the REPEAT button during memory playback, the player repeats the current memory playback. · If you press the MEMORY or RETURN button while the MEMORY display appears on the screen, the MEMORY display disappears. · The programmed selections will be cleared when you turn off the player. 3 Press PLAY while the MEMORY display appears on the screen. PLAY The player starts memory playback. 26 Playing in Random Order You can play titles, chapters within a title, or tracks in random order. (Random playback) Title: 1 Chapter: 3 Title: 2 Chapter: 2 Title: 3 Chapter: 1 CLEAR 2 1 DVD VCD CD Playing titles, chapters or tracks in random order Press RANDOM. RANDOM 1 To resume normal playback Press CLEAR. CLEAR Advanced playback Each time you press the RANDOM button, the random mode changes as follows. Chapter Random DVD Chapter Random Plays chapters in the same title in random order. Title Random Track Random Random Off Plays titles in random order. Resumes normal playback. Notes · Some discs may not permit random playback operation. · You cannot use the random playback function in conjunction with the memory playback feature. DVD VCD CD If you press the RANDOM button during playback, the player automatically starts random playback after finishing the current title, chapter or track. 2 Press PLAY. PLAY The player starts random playback. Press the PLAY button within about 5 seconds after you press the RANDOM button. 27 Advanced playback Zooming a Picture You can magnify areas within a picture. ZOOM / / / RETURN CLEAR DVD Zooming a picture To resume normal playback Press ZOOM repeatedly so that "Zoom" disappears. ZOOM Press ZOOM during normal, slow or still playback. ZOOM As you repeatedly press the ZOOM button, the magnification level increases. To reduce the magnification level, press the RETURN button. If you press the / / / buttons, the zoom point shifts. When the zoom point reaches an edge of the picture, the color of "Zoom" changes. Pressing the CLEAR button restores the zoom point to the center of the picture. RETURN ENTER CLEAR Notes · Some discs may not respond to zoom feature. · During some scenes, the buttons may not work as described. · Zooming does not work on subtitles or menus included on DVD video discs. · During zoom playback, the / / / buttons cannot work on menus included on DVD video discs. If you want to view the menus, cancel the zoom playback. · The magnification level varies depending on the picture size you select. 37 Selecting 3-D (N-2-2) Sound Enhancement You can enjoy expansive virtual surround sound effects from just two speakers. 3D DVD VCD CD Selecting 3-D (N-2-2) sound enhancement Notes · You may sense a difference in volume between normal and 3-D (N-2-2) enhanced sound. · 3-D (N-2-2) sound enhancement may not function (or may not be realized) depending on the sound output setting or recording system 31 . · If 3-D (N-2-2) sound enhancement is on, Dolby Pro Logic Surround may not function on output sounds at all, or may function differently than usual. Press 3D during playback. 3D The current setting is displayed. [. . . ] (3) All warranty servicing of this product must be made by a TACP/THI/TCL Authorized Service Station. warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. [. . . ]