User manual TOSHIBA SD-V396

[. . . ] Introduction 2 Connections DIGITAL VIDEO 14 DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER Basic setup 22 SD-V396SU OWNER'S MANUAL Playback (VCR) 29 Recording (VCR) 34 Other functions (VCR) 39 Basic playback (DVD) 42 Advanced playback (DVD) 45 Function setup (DVD) 55 Others 67 2004 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 2C53601A (E)COV 1 3/10/04, 11:30 Introduction IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SELECTION STEREO L CH R CH MONO SOUND HEARD ON BOTH SPEAKERS STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO 2 CH Press ENTER to select "ON". Then press VCR MENU until the menu screen is cleared. SET + VCR MENU SETUP CH + ENTER SET MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +/-/ENTER/MENU Listening to SAP When the VCR is turned on or a channel selection is made, make certain the letters "SAP" appears on the screen for about 4 seconds. This means that the "Second Audio Program" broadcasting is available. STEREO SAP SAP OR Notes: When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cable not connected), the sound will be monaural. 39 2C53601A (E)p38-41 39 3/10/04, 11:33 Other functions (VCR) Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. VCR DVD 2 1 4 5 Duplicating a video tape Preparation: Turn ON the TV and select the corresponding video input. Press VCR DVD selector to select the VCR mode. (The VCR indicator will light. ) Load a cassette tape with the erase prevention tab intact. Load a previously recorded tape into the playback VCR or Camcorder. Connection with second VCR Playback VCR To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT 1 2 Press SP/SLP to select the desired tape speed SP or SLP. SP/SLP PLAY MODE It is recommended that you set the tape speed to the SP mode on the recording VCR for best results. AUDIO/VIDEO cable (supplied) Recording VCR Press INPUT SELECT once or twice to select AUDIO/VIDEO input position. "L1" or "L2" will appear in the display. INPUT SELECT PROGESSIVE To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN L1: on the rear panel L2: on the front panel Connection with Camcorder Playback Camcorder 3 4 5 40 Press PLAY on the playback VCR or Camcorder. To AV Jack Press REC/OTR on the recording VCR. The duplicating process begins. REC/OTR Recording VCR To AUDIO (R) IN To AUDIO (L) IN To VIDEO IN AUDIO/VIDEO cable (not supplied) Press STOP after duplicating a video tape. For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. 2C53601A (E)p38-41 40 3/10/04, 11:33 Recording a DVD/CD disc You can record disc material in DVD, Audio CD, etc. onto a Video tape with this DVD/VCR. 2 1 4 3 5 Duplicating a DVD or CD disc Preparation: Turn ON the TV and select the corresponding video input. Press VCR DVD selector to select the VCR mode. (The VCR indicator will light. ) Load a cassette tape with the erase prevention tab intact. Load a DVD/CD disc. Notes: You may not be able to record the beginning of the disc. Begin VCR recording once program playback commences on the DVD. When the scanning mode is set to the progressive mode, you cannot duplicate a disc material onto a video tape. When REC/OTR is pressed, the PROGRESSIVE indicator " " on the display window will flash and "Please Set Off" will appear on the screen. You can not record discs encoded with copy guard function. The following icon and text will show up on the TV screen. 1 2 3 4 5 Press SP/SLP to select the desired tape speed SP or SLP. SP/SLP PLAY MODE 00 : 00 : 00 SP Other functions (VCR) DISC IS COPY PROTECTED Press VCR DVD selector to select the DVD mode. The DVD indicator will light. VCR DVD Press PLAY to start playback. PLAY Press REC/OTR to start recording. REC/OTR The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape. Press STOP if you finish recording. If you wish to stop a DVD/CD disc, press VCR DVD selector to change the DVD mode, then press STOP. 41 2C53601A (E)p38-41 41 3/10/04, 11:33 Basic playback (DVD) Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. 4 3, 5 1 DVD VCD CD Display window 2 STOP PLAY Basic playback Preparations: When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. [. . . ] Saque el disco y presione OPEN/CLOSE en el aparato y presione POWER ( ). La bandeja del disco se cierra automticamente y se desconecta el aparato. Reproduccin de cmara lenta Presione SLOW( ) durante la reproduccin normal o cuadro a cuadro. Cada vez que presione el botn de SLOW, cambiar la velocidad del slow. Para seguir con la reproduccin normal, presione PLAY. [. . . ]