User manual TOSHIBA SD-V594

[. . . ] Introduction 2 Connections 16 DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER Basic setup (VCR) 27 SD-V594SC OWNER'S MANUAL Playback (VCR) 34 Recording (VCR) 39 Other functions (VCR) 44 Basic playback (DVD) 47 Advanced playback (DVD) 50 Function setup (DVD) 63 Others 71 2006 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 2I40301A-En_cov 1 21/3/06, 9:41 AM Introduction SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. [. . . ] The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. SET +/ ENTER CANCEL VCR MENU EJECT DVD/VCR SELECT TIMER REC Timer recording Preparation: Press DVD/VCR to operate the DVD/VCR. Press DVD/VCR SELECT to select the VCR mode. Load a cassette tape with the erase prevention tab intact. Check the time and date are correct ' . Example: Program a timer recording for the 26th day, channel 125 (Cable TV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP). 5 To enter other programs, repeat steps 2 through 4. To return to the normal screen, press VCR MENU twice. 26(SA) 11:00PM 11:30PM125 SLP DATE START END CH 1 Press VCR MENU. Select "TIMER REC SET", then press ENTER. MENU TIMER REC SET AUTO REPEAT ON OFF ON OFF SAP CH SETUP SYSTEM SETUP +//ENTER/MENU +//ENTER/CANCEL/MENU : : : : : : : : : : : : : : 6 Press TIMER REC. The timer symbol ( ) will appear on the display and the VCR standbys for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off. 2 Press SET + or to select one of the program line, then press ENTER. DATE +//ENTER/CANCEL/MENU START END : : : : : : : : : : : : : : : : CH Notes: The timer recording will start at 5 seconds before the preset starting time. If the timer symbol ( ) does not appear on the display when TIMER REC is pressed, the cassette is not inserted 34 . 3 4 Press SET + or to select the date, then press ENTER. DATE START END CH 26(SA) +//ENTER/CANCEL/MENU : : : : : : : : : : : : : : : : If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 34 . During Timer recording, the power cannot be turned off. Notes: If the timer symbol ( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape. During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC then press DVD/VCR SELECT to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode. If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again. After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock ' and reprogram any timer recording. Set the start time, end time, channel and tape speed as in step 3. 26(SA) 11:00PM 11:30PM125 SLP DATE START END CH Notes: Press CANCEL to move cursor backward for correction. To record from external source set the channel to "L1" or "L2". +//ENTER/CANCEL/MENU : : : : : : : : : : : : : : 42 2I40301A-En_p40-43 42 21/3/06, 9:44 AM SET +/ ENTER CANCEL VCR MENU DVD/VCR SELECT TIMER REC ToSetting procedure set daily/weekly timer Weekly (e. g. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]