User manual TOSHIBA SD-2300

[. . . ] POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOUD. This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location-see service procedure. [. . . ] Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD player to malfunction. Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction. Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children's fingers around the closing disc tray as there is a risk of personal injury. When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing. Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing. Video CD This contains recordings of pictures and sound whose quality is on a par with that of video tape. This player also supports Video CDs with playback control (Version 2. 0). When the button is pressed again, the speed increases. (Each time the button is pressed, the speed increases up to 4 steps (DVD) or 3 steps (CD/Video CD). ) G The speed will be maintained even after the button is released. SLOW (F V / V G) To return to normal playback, press PLAY. Note The DVD player does not play back sound during high speed reverse and forward playback of DVD video discs. However, the DVD player plays back sound during fast forward or fast reverse playback of audio CDs. Subtitles do not appear on the screen during scan playback. Playing in Slow-Motion (DVD and Video CD only) F V or V G during playback. The playback speed is reduced to 1/16 of the normal speed. Press SLOW [TV screen] FV 1/16 V G 1/16 G The speed that the image advances (or reverses) is slow at first. When the button is pressed again, the speed increases. (Each time the button is pressed, the speed increase up to 4 steps. ) G The speed will be maintained even after the button is released. To return to normal playback, press PLAY. Notes The sound is muted during slow-motion playback. The Slow-Motion playback in reverse is not applicable for Video CDs. The SLOW buttons do not function with Audio CDs. OPERATION USING GUI MENU PAGE 23 General Information about GUI Menu This unit features an icon based GUI menu showing disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc. ). Some icons only show the indicated information. Other icons allow settings to be changed. Common procedures 1 Press GUI DISPLAY during playback. G Title function can be accessed from the stop mode. 2 Press D/E to select the desired item. G The current selected item is highlighted by a yellow frame around its menu icon. 3 Press F/G to select the desired setting. 1 2, 3 G When numbers are displayed (e. g. [. . . ] Failure to return the card will not affect your rights under this warranty. Your Responsibility The above warranties are subject to the following conditions: (1) You must retain your bill of sale or provide other proof of purchase. (2) You must notify a TACP/THI/TCL /Authorized Service Station within thirty (30) days after you discover a defective product or part. (3) All warranty servicing of this product must be made by a TACP/THI/TCL Authorized Service Station. [. . . ]