User manual TOSHIBA SD-2710

[. . . ] Introduction 2 Connections 16 DIGITAL VIDEO Basic playback DVD VIDEO PLAYER 20 SD-2710 OWNER'S MANUAL Advanced playback 26 Function setup 38 Others 46 S 79077142 9876123000 ©2001 Toshiba Corporation Introduction SAFETY PRECAUTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR AVIS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol for CLASS II (Double Insulation) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] e. g. TITLE 1 TITLE 2 3 Press ENTER. Playback starts from chapter 1 of the selected title. ENTER TITLE 3 TITLE 4 2 Press want. / / / to select the title you ENTER If the titles in the top menu are assigned a number, you can directly locate a specific title by pressing its designated number with the number buttons. Notes · The instructions above describe basic procedures which may vary depending on the contents of the DVD video disc. If different instructions appear on the TV screen, follow those instructions. · If you display the top menu during playback and press the TOP MENU button again without selecting any title, the DVD video player may resume playback from the point where you first pressed the TOP MENU button (depending on the actual DVD video disc. ) · This method of locating a title is available only on a disc that contains a top menu. · Instruction notes of discs may refer to the button that displays the top menu as TITLE button. DVD Locating a title by entering the title number Press T. SEARCH 1 T Make sure that the space of "T (Title)" is highlighted. (You can shift the highlight using the / buttons. ) e. g. 1 1 ­ :­­:­­ Notes · Pressing the CLEAR button resets the title and chapter numbers. To clear the "T (Title)" and "C (Chapter)" display, press the T button several times. · This method of locating a title is available only on a disc that contains title numbers. 2 3 24 Enter the number for the title you want, using / or the number buttons. e. g. To select title 2 To select title 12 2 1 2 Press PLAY. PLAY Playback starts from chapter 1 of the selected title. TOP MENU SKIP PLAY / / / ENTER CLEAR T Number buttons DVD VCD CD Locating a specific chapter or track directly Press T. If you are using a VIDEO CD/audio CD, skip steps 1 and 2. Then at step 3, enter the number for the track you want using the number buttons. SEARCH 1 2 3 4 Press PLAY. PLAY Basic playback Playback starts from the selected chapter or track. e. g. 1 1 ­ :­­:­­ T To select a title and chapter number at the same time Perform step 1, and enter a title number you want in the space of "T (Title)" using the number buttons or the / buttons then perform steps 2 to 4. Note Pressing the CLEAR button resets the title and chapter numbers. To clear the "T (Title)" and "C (Chapter)" display, press the T button several times. Press to highlight the space of "C (Chapter). " e. g. 1 ENTER 1 ­: ­­:­­ Enter the number for the chapter or track you want, using / or the number buttons. When you use the number buttons, you can use the +10 button to select numbers from 10 through 99. To select chapter or track 25 2 5 +10 or +10 5 DVD VCD CD Locating a specific chapter or track Notes · Some titles may not display chapter numbers. · If you press and hold the SKIP or button on the front panel during playback, the DVD video player performs fast reverse or fast forward playback. You can vary the speed by pressing the button repeatedly. To locate chapters or tracks during fast reverse or fast forward playback, first press the PLAY button to resume or button. normal playback, then use the SKIP · When you set "Title Stop" to "Off" 45 , you can access chapters in another title. If you go back to the preceding title by pressing the SKIP button, the DVD video player locates the first chapter of the title. When "Title Stop" is set to "On, " you can access chapters only within the current title. Press SKIP or repeatedly to display the chapter or track number you want. Playback starts from the selected chapter or track. SKIP To locate succeeding chapters or tracks Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track. SKIP 25 Advanced playback Accessing a Specific Location Directly You can access a specific location by entering its corresponding time (hours, minutes, seconds). 3 1 2 DVD VCD CD Entering the time counter of the desired location Press T three times. SEARCH 1 T You may have to press further depending on the disc. Press the button repeatedly until the clock icon is highlighted. e. g. 1 1 ­ :­­:­­ Notes · Some discs may not respond to this process. · Some scenes may not be located precisely as you specified. · This method for accessing specific locations is available only within the current title of the DVD video disc or within the current track of the VIDEO CD/audio CD. 2 Press the number buttons to enter the time. e. g. 1 2 5 3 0 1 1 1:2 5 :3 0 3 Press PLAY. PLAY Playback starts from the desired location. 26 Playing Repeatedly You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) PLAY CLEAR REPEAT A-B RPT DVD VCD CD Repeating a title, chapter, or track Press REPEAT. REPEAT 1 Each time you press the REPEAT button, the repeat mode changes as follows. Chapter Repeat 2 Press PLAY. PLAY The DVD video player starts repeat playback. [. . . ] warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. [. . . ]