User manual TOSHIBA SD-2715

[. . . ] DVD PLAYER OWNER'S MANUAL MODEL : SD-2715 3D Surround Sound Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. ©2001 Toshiba Corporation PAGE 2 INTRODUCTION Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: ATTENTION: CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] This player also supports Video CDs with playback control (Version 2. 0). If a Video CD has "playback control" written on its disc or jacket, it means that particular scenes or information can be selected for viewing interactively with the TV monitor using the menu screen. BASIC OPERATION PAGE 19 Basic Playback (Cont'd) Stopping Play Press STOP during playback. Resume Play G When play is stopped, the unit memorizes the point where STOP was pressed (RESUME function). Press PLAY and playback will resume from this point. Notes This operation works only with discs for which the elapsed playing time appears in the DVD display window during stop. Resume function will be cleared when the STOP is pressed on the STOP mode. Resume function will be cleared when the power is turned off and then on. Opening the disc tray cancels Resume function. The Resume function may not be available on some DVD discs or Video CDs (version 2. 0). STOP PLAY Last Scene Memory This player memorizes last scene for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, Latest Stop Position is automatically recalled. Notes Settings are stored in memory for use any time. Switching of the audio mode, etc. , is automatic on some discs. This player does not memorize if you switch off the player when a DVD or title menu appears on the TV screen. Screen Saver The screen saver is useful to prevent your display from becoming damaged. The screen saver picture appears when you leave the DVD player in stop mode for about 5 minutes. Automatic power off function After the Screen Saver has been engaged for about 5 minutes, the DVD player will automatically turn itself off. Screen Saver PAGE 20 BASIC OPERATION Basic Playback (Cont'd) Exchanging Discs during Playback 1 2 DISC SKIP EX-CHANGE Press EX-CHANGE during playback to open the loading drawer. Press DISC SKIP to rotate the disc tray to the desired position. The carousel will advance clockwise by one disc tray. Note: The disc tray which was in the play position can not be exchanged. 3 OPEN/ CLOSE Exchange the discs and press EX-CHANGE or OPEN/CLOSE to close the loading drawer. Skipping Discs Press DISC SKIP during playback or in the stop mode. G Each time the button is pressed, the next disc tray is selected. TITLE DVD CHP/TRK 12345 12345 Notes When the DISC SKIP is pressed during playback or in the stop mode, the disc tray advances and playback begins from the beginning of the next disc. If there is no disc on the selected disc tray, the disc tray of the next number will be selected. When DISC SKIP is pressed during playback of disc 5, playback of disc 1 will start. PLAY Exchanging the Disc and Starting Playback 1 DISC SKIP Press OPEN/CLOSE during playback or in the stop mode. Play is stopped (if pressed during playback), the loading drawer opens and the disc tray which was in the play position comes to the center position. 2 Exchange the disc in the center position. Center position 3 Press OPEN/CLOSE or PLAY again. The loading drawer closes, the disc tray returns to the play position and playback begins from the new disc. BASIC OPERATION PAGE 21 Special Playback Still Picture (Pause) Press PAUSE during playback. G DVD/Video CD The player will be placed in the still picture mode. G CD Playback will be paused. Frame Advance (DVD and Video CD only) Press PAUSE during still playback. (Each time you press PAUSE, the picture advances one frame) To resume normal playback, press PLAY. PAUSE SKIP SKIP Skipping Chapters and Tracks Forward or Back Skipping forward Press SKIP during playback. A chapter (DVD) or a track (CD/Video CD) is skipped each time this button is pressed. STOP PLAY Skipping back Press SKIP during playback. G When this button is pressed once midway through a chapter/track, the player returns to the start of that chapter/track. [. . . ] warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. [. . . ]