User manual TOSHIBA SD-K600

[. . . ] Introduction 2 Connections 16 Basic playback DVD VIDEO PLAYER 20 SD-400V SD-K600 OWNER'S MANUAL Advanced playback 26 Function setup 38 Others 46 S 79077155 9876123900 ©2001 Toshiba Corporation Introduction SAFETY PRECAUTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR AVIS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol for CLASS II (Double Insulation) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] To clear the "T (Title)" and "C (Chapter)" display, press the T button several times. · This method of locating a title is available only on a disc that contains title numbers. 2 3 24 Enter the number for the title you want, using / or the number buttons. e. g. To select title 2 To select title 12 2 1 2 Press PLAY. PLAY Playback starts from chapter 1 of the selected title. TOP MENU SKIP PLAY / / / ENTER CLEAR T Number buttons DVD CD Locating a specific chapter or track directly Press T. If you are using an audio CD, skip steps 1 and 2, then at steps 3, enter the number for the track you want using the number buttons. SEARCH 1 2 3 4 Press PLAY. PLAY Basic playback Playback starts from the selected chapter or track. e. g. 1 1 ­:­­:­­ T To select a title and chapter number at the same time Perform step 1, and enter a title number you want in the space of "T (Title)" using the number buttons or the / buttons then perform steps 2 to 4. Note Pressing the CLEAR button resets the title and chapter numbers. To clear the "T (Title)" and "C (Chapter)" display, press the T button several times. Press to highlight the space of "C (Chapter). " e. g. 1 ENTER 1 ­: ­­:­­ Enter the number for the chapter or track you want, using / or the number buttons. When you use the number buttons, you can use the +10 button to select numbers from 10 through 99. To select chapter or track 25 2 5 +10 or +10 5 DVD CD Locating a specific chapter or track Notes · Some titles may not display chapter numbers. · If you press and hold the SKIP or button on the front panel during playback, the DVD video player performs fast reverse or fast forward playback. You can vary the speed by pressing the button repeatedly. To locate chapters or tracks during fast reverse or fast forward playback, first press the PLAY button to resume normal playback, then use the SKIP or button. · When you set "Title Stop" to "Off" 45 , you can access chapters in another title. If you go back to the preceding title by pressing the SKIP button, the DVD video player locates the first chapter of the title. When "Title Stop" is set to "On, " you can access chapters only within the current title. Press SKIP or repeatedly to display the chapter or track number you want. Playback starts from the selected chapter or track. SKIP To locate succeeding chapters or tracks Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track. SKIP 25 Advanced playback Accessing a Specific Location Directly You can access a specific location by entering its corresponding time (hours, minutes, seconds). 3 1 2 DVD CD Entering the time of the desired location Press T three times. SEARCH 1 T You may have to press further depending on the disc. Press the button repeatedly until the clock icon is highlighted. e. g. 1 1 ­ :­­:­­ Notes · Some discs may not respond to this process. · Some scenes may not be located precisely as you specified. · This method for accessing specific locations is available only within the current title of the DVD video disc or within the current track of the audio CD. 2 Press the number buttons to enter the time. e. g. 1 2 5 3 0 1 1 1:2 5 :3 0 3 Press PLAY. PLAY Playback starts from the desired location. 26 Playing Repeatedly You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) PLAY CLEAR REPEAT A-B RPT DVD CD Repeating a title, chapter, or track Press REPEAT. REPEAT 1 Each time you press the REPEAT button, the repeat mode changes as follows. Chapter Repeat 2 Press PLAY. PLAY The DVD video player starts repeat playback. Press the PLAY button within about 5 seconds after you press the REPEAT button. Advanced playback DVD Chapter Repeat Title Repeat Track Repeat All Repeat Repeat Off Repeats the current chapter. Resumes normal playback. To resume normal playback Press CLEAR. CLEAR DVD CD DVD CD Note Some discs may not permit repeat operation. DVD CD Repeating a specific segment Press A-B RPT at the beginning of the segment (point A) you want to play repeatedly. A-B RPT 1 To resume normal playback Press CLEAR. CLEAR A­ 2 Press A-B RPT again at the end of the segment (point B). A-B RPT The DVD video player automatically returns to point A and starts repeat playback of the selected segment (A-B). A­B Notes · Some discs may not permit A-B repeat operation. · You cannot set the A-B repeat function for a segment that includes multiple camera angles 33 . · You can specify a segment only within the current title. · There may be a slight difference between point A and the location where playback actually resumes depending on the disc. 27 Advanced playback Playing in a Favorite Order You can combine your favorite titles, chapters, or tracks and play them in the order you determine. You can program up to 30 selections into the memory. [. . . ] warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. [. . . ]