User manual TOSHIBA SD-K625

[. . . ] DVD PLAYER OWNER'S MANUAL MODEL : SD-K625 SD-2815 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. 1-3 Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass all signals through without down conversion, or processing. Pluge (Blacker than Black) For proper adjustment of your television brightness settings utilizing a commercially available test disc. On: Select when you adjust the level of your TV using a commercially available test disc that contains pluge signals. Off: For normal use. DNR (Digital Noise Reduction) You can reduce ambient noise in the picture. DNR1: Normal level DNR2: Expanded level. Off: Off. Others The DRC, Vocal, PBC, B. L. E. , Pluge and DNR settings can be changed. 4 Press 3/4 to select the desired item and press ENTER. The setting of the selected item alternates between On and Off. Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others DRC On Vocal On PBC On Notes ­ Actual picture enhancement may vary depending on the quality of the disc. ­ While the DNR2 (expanded level) can provide additional improvement in the reduction of noise in the video signal, it may produce undesirable picture artifacts on some discs. Should this occur, select a more appropriate DNR level (normal or off). ­ Depending on the disc, some picture detail may be lost by the picture enhancement. ­ A DVD audio disc with Dolby Digital or DTS soundtrack may be played, some DVD audio discs include moving pictures which may be modified by the above processes. B. L. E. Off Pluge Off DNR Off 1-16 Before Operation (Cont'd) Parental Control Rating DVD Area Code DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others 8 7 6 5 4 3 2 1 Unlock Change Disc Audio Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others Code Set US Select "Rating" 1 and 4 buttons. on the Setup menu using the 3 2 While "Rating" is displayed, press 2. have not entered a password 3 When ayou personal 4-digit security number yet;then Install 4-digit password using the buttons to create a password, press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already entered a password; Install your 4-digit password using the number buttons to confirm the personal 4-digit security password, then press ENTER. If you make a mistake before pressing ENTER, press CLEAR and install your 4-digit security password again. 4 Area 1 Selectmenu. Code using the 3/4 buttons on the setup 2 While Area Code is selected, press 2. 3 Follow step 3 of "Rating" on left. 4 4 Select the first character using the 3/4 buttons. the cursor using 1/2 5 Shiftsecond character usingbuttons and select 4 the 3/4 buttons. [. . . ] warranties are effective only if the product is purchased and operated in the Continental U. S. A. (5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility. [. . . ]