User manual TOSHIBA SDP95S

[. . . ] Introduction Preparations PORTABLE DVD PLAYER Playback SDP95SWB OWNER'S MANUAL Function Settings DIGITAL VIDEO Connections Other T PX1D00007910 SAFETY PRECAUTIONS Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: This equipment employs a Laser System. [. . . ] · You can connect up to 2 headphones. · Connecting to the headphone jack disables output from the speakers. 33 Playing a disc DVD-V VCD CD The following icons are used in this manual to indicate features and/or functions that are applicable to each disc. DVD-V : DVD Video disc VCD : VIDEO CD CD : Audio CD Preparations · · About Resume playback function The player memorizes the location where playback is stopped and resumes playback from the location where you stopped. If you press PLAY ( ) after stopping playback, playback starts from the location where you stopped. · The player memorizes the information for resume playback for up to 5 discs. The oldest memory is deleted when a 6th disc is inserted. · If you want to return to the beginning of a DVD video disc, press STOP ( ) twice. Notes · The player's memory is cleared when you use a PBCfeatured VIDEO CD while "PBC" is set to "On". (Refer to "Function Settings". ) · There may be a difference in the location where playback resumes depending on the disc. Turn on the power of the player. Place a disc to the player. 1 Press MODE repeatedly to select DVD/CD. Playback 2 Press PLAY ( Playback starts. · ). If you select a DVD video disc that contains a top menu, or select a PBC (Playback Control)-featured VIDEO CD, a menu may appear. You may need to press the TOP MENU or MENU button to display the disc menu (depending on the actual DVD video disc. ) When you play an audio CD, "menu" screen appears. See "Playing audio/video/picture files" about the operation. · · 3 Press STOP ( 34 ) to stop playback. Pausing playback (Still mode) Press PAUSE/STEP ( ) during playback. / The picture gets still and sound is muted. To resume normal playback, press PLAY ( ). Using the top menu DVD-V VCD CD 1 Press TOP MENU. The top menu appears. e. g. 1 2 Adjusting the volume of the speakers or the connected headphones Press and hold VOL ( / ) on the main unit. or Press (press and hold) VOLUME (+/­) on the remote control. VOL / VOLUME ­ : Decrease volume. Note · In many instances, a menu screen will appear after playback of a movie is completed. If you have connected the DVD player to a television, and depending on the type of television that you have, prolonged display of an on-screen menu may result in the on-screen menu becoming permanently ingrained in the screen. This type of damage is not covered by your Toshiba Warranty. To avoid this, be sure to press the STOP ( ) button once the movie is completed. 2 Press / / / to select the title you want. 3 4 Playback If the titles in the top menu are assigned a number, you can select the title by pressing the number buttons. 3 Press ENTER ( ). Playback starts from chapter 1 of the selected title. Notes · This method of locating a title is available only on a disc that contains a top menu. · Instruction notes of discs may refer to the button that displays the top menu as TITLE button. · The instructions above describe basic procedures which may vary depending on the contents of the DVD video disc. If different instructions appear on the screen, follow those instructions. 35 Playing a disc (continued) About the screen saver If 20 minutes elapse while the power is on and there is no disc in the player or while the disc is stopped, the screen saver is automatically displayed (when "Screen saver" (refer to "Function Settings") is set to "On"). To turn off the screen saver, press any button on the main unit or remote control. Playback · About the LCD The LCD panel contained in this product is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc. ). This is a structural property of LCD technology, it is not a sign of malfunction, and is not covered under your warranty. [. . . ] Or disconnect the AC adapter and abnormalities such as static electricity may insert it into the wall outlet again. The remote control is not pointed at the · Point the remote control at the remote sensor of the player. The remote control is too far from the · Operate the remote control within about 3 m (9. 9 feet). The battery in the remote control is · Replace the battery with new one. [. . . ]