User manual TOSHIBA SD-V390

[. . . ] DVD VIDEO PLAYER & VIDEO CASETTE RECORDER SD-V390-S-TU OWNER'S MANUAL Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. ©2002 Toshiba Corporation This device does not tape-record copy protected DVD Video Discs. 1-49 Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] WEEKLY event. . . . for recording up to 8 programs on a certain day of every week. DAILY event. . . . for recording up to 8 programs at the same time(s) Monday through Friday. Preparation: Turn on the power of both the DVD+VCR and the TV. Be sure the TV is set to the DVD+VCR output channel (3 or 4). Make sure the TUNING BAND in the TUNING menu is set appropriately (TV or CATV). 1 Press VCR MENU and the MAIN menu will appear. go to the PROGRAM 3 Press ENTER tomenu will appear. The PROGRAM Tip If the input data is wrong, use and correct it using b/B. v to select the data If all programs have already been entered, FULLY PROGRAMMED message will appear for a moment and then PROGRAM 1 will appear on the TV screen. 12 Press VCR MENU, the program will be memorized at the DVD+VCR. TIMER indicator lights in the display window. If the program preset time is past, the PAST TIME PROGRAMMED message will appear on the TV screen. Return to the incorrect program and program it with the correct time. If you had entered a past date, the timer recording will be performed on that date of the next year. Additional programs may be entered by repeating steps 1-12. Cable Users: If your cable hookup is via a TV converter box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD+VCR. 4 V to choose the MONTH option. 7 Use b/B to choose the desired start time. Use Use b/B to choose the PROGRAM No. (1-8). Tip If you have finished programming and you want to set the DVD+VCR to record the programs you have entered. MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD+VCR. The DVD+VCR is now set to record the preset programs. 8 9 Press and hold Use V to choose the STOP option. Use b/B to choose the desired stop time. Press and hold b/B to advance the clock faster. Use b/B to choose the desired channel (Channel, LINE1 or LINE2). b/B to advance the clock faster. Note If the power fails or the DVD+VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer must be reset when power is restored. Reset the clock according to instructions. [. . . ] Do not apply AC power to this VCR+DVD and/or any of its electrical assemblies unless all solid-state device heat sinks are cerrectly installed. Always connect test instrument ground lead to the appropriate ground before connection the test instrument positive lead. Always remove the test instrument ground lead last. Insulation Checking Procedure Disconnect the attachment plug from the AC outlet and turn the power on. [. . . ]