User manual TOSHIBA ST-7000-C

[. . . ] TOSHIBA POS Terminal ST-7000C SERIES Owner's Manual CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen. Dans un environnement domestique, il peut causer des interférences radio. [. . . ] USE ONLY TOSHIBA TEC SPECIFIED consumables. DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or gas. When moving the machine, take hold of the drawer and lift the machine. Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury. Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and may cause fire. It may fall on you and could cause injury. Place the machine on a stable and level surface. Request Regarding Maintenance Utilize our maintenance services. After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistancii once a year to have the inside of the machine cleaned. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. The contents of this manual may be changed without notification. Please refer to your local Authorised Service representative with regard to any queries you may have in this manual. 1. INTRODUCTION EO1-12030 1. 1 Accessories 1. INTRODUCTION Thank you for choosing the TOSHIBA POS Terminal. This POS Terminal contains all the high performance register function necessary for a POS Terminal and enables the user oriented system configuration. By adopting a high-speed CPU, Memory with large capacity, this POS Terminal flexibly accepts the modification corresponding to the future system environment as the user expects. This manual describes the functions and handling of this POS terminal and should be read carefully to help gain maximum performance and life from your POS terminal. For most queries please refer to this manual and keep it safe for future reference. 1. 1 Accessories# Confirm that all the following accessories are contained in the carton. If any accessories are missing or damaged, contact your TOSHIBA TEC service representative. Cable Cover (1 pc. ) Front Panel Key (2 pcs. ) Cable Clamp (2 pcs. ) (Used to secure the USB Cable, etc. to the POS terminal) # # Ferrite Core (2 pcs. ) (For the Drawer Cable) Ferrite Core (1 pc. ) (For the Audio Cable) # Ferrite Core (2 pcs. ) (For the TFT Monitor Cable) # # # Bind Unify Screw N0. 6x4. 5 (8 pcs. ) (Used to secure the HDDs) Double Sems Screw M-3x8 (2 pcs. ) (Used to secure the Cable Clamp) # # NOTE: The power cord is not included in the carton. Please prepare it separately from a local dealer. 1- 1 2. APPEARANCE < Front View > Power LED Front Panel Lock Front Panel HDD LED POWER LED HDD LED Reset Switch Volume Power Switch USB5 Connector Cover Catch CD-RW Drive (Option) (1) Power Switch This is the switch to turn the power of the POS terminal ON or OFF. [. . . ] Be sure to disconnect the power cord prior to performing any maintenance. Do not pour water directly on the POS Terminal or wipe it with a soaked cloth, as this may cause fire, electric shock, or machine failure. CAUTION!Never use an organic solvent like thinners or benzene for cleaning. Using such solvents may discolor the covers. [. . . ]