User manual TOSHIBA TDP-S8

[. . . ] OWNER'S MANUAL (Getting Started) For more details , please refer to the owner's manual of the CD-ROM version Others Maintenance Operations Preparations DATA PROJECTOR TDP-S8 Before Using SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] Removing the lens cover Power cord connector (Supplied) Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat. The power turns on the green indicators light: POWER. After a moment, the start-up screen appears. KEYSTONE + KEYSTONE - · Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight. · Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating. · Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object. CAUTION Notes · The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the start-up screen not to appear via the Display setting menu p. 32 . · The first time you use the projector after purchase, after the start-up screen disappears, the start menu is displayed p. 25 . · When [Key lock] is [On], the operation buttons of the projector do not work p. 28 . · When [Password] is [On], the start-up screen is displayed after the Password entry screen disappears p. 28 . 23 Operations Turning the power on 1 Press the ON/STANDBY button. Control panel POWER Remote Control Start-up screen Turning the power off 1 Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears. ) 2 Press the ON/STANDBY button again. The screen turns off, but the internal cooling fan continues to operate for a short. Then , the projector goes into standby mode. When cooling lamp POWER After cooling complete POWER FLASH A B C A During cooling , the POWER indicator flashes. In this state, the power cannot be turned back on. If you are in a hurry, there is no problem with unplugging the power cord or turning off the main power switch in this state. In standby mode B Note · The projector consumes about 15W of power in standby. We recommend that you unplug the power cord if you will not be using the projector for an extended period. PRECAUTION · If the power cord is unplugged before cooling is complete, give the lamp time (about 5 minutes) to cool before plugging it back in. 24 Basic operations 1 Turn on the power. Turn on the power by following the instructions in "Turning the power on" p. 23 . When the projector is used for the first time after purchase, the start menu for language(to display the menus and messages on screen) and confugration is displayed in English. (if the screen is out of focus, adjust it according to the step 6 . ) 2 Select the language (When using the first time). Use the or button to select the desired language and press the button. Message for setup confirmation is displayed in a selected language. English German French Italian Spanish Portuguese Chinese (traditional) Chinese (simplified) Japanese Korean Russian Swedish Turkish Polish · When the projector is turned on the next time, the start menu does not appear upon startup. However, if [Reset all] is executed from the Default setting menu p. 33 , the start menu will be displayed the next time when the power is turned on. · The language can slso be set via the Display setting menu p. 32 . [. . . ] · Is the input signal supported by the projector?p. 42 , p. 43 · Is there something generating an abnormal video signal, for instance the video tape?· · · · Is the lens dirty?p. 38 Is the lens focus adjusted optimally? [. . . ]