User manual TOSHIBA TDP-T9

[. . . ] OWNER'S MANUAL (Getting Started) DATA PROJECTOR TDP-T9 For more details , please refer to the owner's manual of the CD-ROM version SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. [. . . ] · The MONITOR terminal outputs analog RGB signals or component video signals (Y/PB/ PR) from the COMPUTER IN terminals as selected with the INPUT button. If no input is selected, the MONITOR terminal outputs the input signals last selected among the COMPUTER terminals. · A computer monitor usually cannot accept Y/PB/PR signals correctly. Monitor Computer (for control) Before connection To video output AV cable (not supplied) To audio input Audio cable (not supplied) To RS-232C terminal Control cable AUDIO IN MONITOR COMPUTER S-VIDEO VIDEO AUDIO OUT CONTROL RGB cable (supplied) Computer To RGB output AV cable (not supplied) To S-video output Audio cable (not supplied) To audio output Notes · Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction. · When an AUDIO OUT terminal is connected, sound is not output from the projector speaker. · Output volume of AUDIO OUT terminal can be adjusted by the VOL button. 24 Turning the power on and off Connecting the power cord 1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or other power outlet. Removing the lens cover Power cord connector (Supplied) Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat. The power turns on the green indicators light: Power. After a moment, the start-up screen appears. KEYSTONE + KEYSTONE - · Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight. · Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating. · Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object. CAUTION Notes · The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the start-up screen not to appear via the Display setting menu p. 34 . · The first time you use the projector after purchase, after the start-up screen disappears, the start menu is displayed p. 27 . · When [Key lock] is [On], the operation buttons of the projector do not work p. 30 . · When [Password] is [On], the start-up screen is displayed after the Password entry screen disappears p. 30 . 25 Operations Turning the power on 1 Press the ON/STANDBY button. Control panel POWER Remote Control Start-up screen Turning the power off 1 Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears. ) 2 Press the ON/STANDBY button again. The screen turns off, but the internal cooling fan continues to operate for a short. Then , the projector goes into standby mode. When cooling lamp POWER After cooling complete POWER FLASH A B C A During cooling, the Power indicator flashes. In this state, the power cannot be turned back on. [. . . ] p. 44 , · Is there something generating an abnormal video signal, for instance the video tape?· · · · · Is the lens dirty?p. 28 Is the projection distance within the projector's supported range?p. 23 Is the projector's screen placement angle tilted too far? [. . . ]