User manual TOSHIBA TECRA M11

[. . . ] Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. EverNote is a registered trademark of EverNote Corporation. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu Computer Systems Corporation is under license. Google and Picasa are trademarks or registered trademarks of Google Incorporated. [. . . ] Note that the drive designation can be changed with the Disk Management tool located at Administrative Tools -> Computer Management. Wipe the disc with a non-abrasive CD cleaning cloth and reinsert. It if still will not work try another DVD/CD-RW/CD-ROM in the drive. However, you may disable this feature. DVD/CD-RW/CD-ROM is dirty or defective. The drive access indicator on the Status Indicator Panel blinks at regular intervals with no disc in the tray or the drive is not installed. The Windows auto insertion function is active and is checking to see if a disc is ready to run. Hard Drive Problems You cannot access your hard drive. The wrong drive designator was used by an application when a bootable disc was used to start the notebook. Security is set so your OS cannot be started without a password. Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted. Verify your password and security settings. Keyboard or Mouse Problems The built-in keyboard does not seem to work. The notebook has gone into Standby mode. Push the Power/Suspend/Resume button. 79 - Troubleshooting Problem The built-in keyboard does not seem to work. (continued) You have installed an external keyboard or mouse, and it does not seem to work. Possible Cause Your application has locked out your keyboard. The installed primary battery is completely discharged, there is no optional second battery installed or there is no Power adapter (AC or Auto/Airline) installed. The primary battery is installed but is faulty. Check the Status Indicator Panel to determine the presence and condition of the batteries. See "Status Indicator Panel" on page 21. Install a charged battery or a Power adapter. Use the Status Indicator panel to verify the presence and condition of the batteries. See "Status Indicator Panel" on page 21. If a battery is indicating a short, remove that battery and operate from another power source or replace that battery. Check the Status Indicator Panel to determine the presence and condition of the batteries. See "Status Indicator Panel" on page 21. Use a Power adapter to operate until a battery is charged or install a charged battery. Verify that your adapter is connected correctly. [. . . ] Select "Connect to a network". Select a network from the list that appears, and click the [Connect] button. 148 - Configuration of the WLAN Device Configuring the WLAN Using Windows XP Procedure 1 2 3 4 5 6 Click the Start button, then select Control Panel. If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network Connections icon. [. . . ]