User manual TOSHIBA TLP 781

[. . . ] CONTENTS OWNER'S MANUAL 3LCD DATA PROJECTOR TLP780U TLP781U (WITH DOCUMENT IMAGING CAMERA) TLP780U SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CONTENTS 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. FCC Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. [. . . ] Press the PIP button again to turn off the sub-picture. KEYSTONE AUTO SET Operations L-CLICK R-CLICK Notes · · · · The PIP function cannot be used when a source other than an RGB input source is selected. The PIP function cannot be used with no signals supplied from an RGB signal source. The sub-picture turns off if any other operation is performed. The signal source, size, display position and audio input source to display sub-pictures can be changed from the menu screen. 53 VOLUME/ADJUST MENU ENTER EXIT PIP PIP FREEZE CALL MUTE RESIZE Displaying Information Information on the input signal source, etc. , can be displayed. Remote control INPUT LASER ON/STANDBY CONTENTS 41 CALL Press CALL. The information described below is displayed. The information display turns off when the CALL button is pressed again. KEYSTONE AUTO SET Status display Input H-resolution V-resolution H-frequency V-frequency Sync Video mode Signal format Lamp time Version Shutter - current input source - the horizontal resolution of the input signal (at RGB input) - the vertical resolution of the input signal (at RGB input) - the horizontal frequency of the input signal (at RGB input) - the vertical frequency of the input signal (at RGB input) - the polarity of the sync signal (at RGB input) - the color mode of the video signal (at Video, S-Video input) - the formatting of the Y/PB/PR signal (at Y/PB/PR input) - the elapsed using time of the lamp - the version of the firmware - the shutter speed of the document imaging camera (at document imaging camera input) Operations L-CLICK R-CLICK VOLUME/ADJUST MENU ENTER EXIT PIP FREEZE CALL CALL MUTE RESIZE Notes · The information displayed is not refreshed even if it changes. To refresh the information, turn off the information display, then turn it back on. · The information display turns off if any other operation is performed. · The "Lamp time" shows an approximate time for lamp replacement. (It should not be used as a lamp warranty time counter. ) If the time indicated here nears 1000, contact your store of purchase about obtaining a replacement lamp (TLPL78, sold separately). · The "Lamp time" can be reset when the lamp is replaced. · The "Version" is the version of the control program used in the projector and is used for servicing, etc. Operating a computer by the remote control Remote control INPUT LASER ON/STANDBY CONTENTS 42 You can control a computer by the remote control when the projector and computer are connected with the supplied USB cable. In this manual, this function is explained as "mouse remote control". Point the remote control at the remote control sensor on the projector when operating with its buttons. · To move the pointer Press the outer side of the pointer control button in the direction in which you want to move the pointer. (The speed at Pointer control which the pointer moves depends on how strongly the button is pressed. ) · To click R-CLICK Press L-CLICK or the center of the pointer L-CLICK control. · To drag and drop While holding down the center of the pointer control, press the rim side to move the pointer to the desired spot, then release the center part. Computer KEYSTONE AUTO SET USB MONITOR OUT CONTROL COMPUTER IN 1 ( Y/PB/PR ) COMPUTER IN 2 AUDIO IN R - AUDIO - L VIDEO IN VIDEO S-VIDEO L-CLICK R-CLICK Operations VOLUME/ADJUST MENU ENTER EXIT PIP FREEZE CALL MUTE RESIZE USB cable (supplied) To USB connector Be sure to connect in the proper direction. To USB port Notes · This function is available with Windows98 and Mac OS9 computers equipped with a USB port as standard. · When connecting the computer's USB port for the first time, a message asking you to insert the Windows98 CD-ROM may appear on the computer's monitor screen, depending on whether or not the device driver is installed. · When using a USB cable other than the supplied one, be sure to use a shielded type. Operating the menu screen Start MENU CONTENTS 43 Various adjustments and settings can be made on the menu screen. The basic operation on the menu screen is shown here. GUIDE MENU: You can adjust or set the functions used frequently. FULL MENU: For the operating instruction, refer to the next page. 44 MENU Press MENU. Then GUIDE MENU appears, and a list of several items is displayed in the menu. The current input source MENU When you make more detailed adjustments and settings, call the FULL MENU. Return to the GUIDE MENU when the MENU button is pressed. Press MENU button once again. The FULL MENU of [Picture] appears. [. . . ] · The "Yes" marks in the input source columns indicate that that command can be used. Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Picture Video mode (Continued) Auto. NTSC PAL SECAM PAL-N PAL-M PAL60 NTSC4. 43 Auto. 50Hz 60Hz Full Thru Wide Selection Command KV0 KV1 KV2 KV3 KV4 KV5 KV6 KV7 SG0 SG1 SG2 SG3 SG4 SG5 CSA CS0 CS1 MSF MST MSW COG DRV PHP PVP PPH PCK DRP Adjustment Analog RGB(1) Digital RGB Command Analog RGB(2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Video S-Video Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Y/PB/PR Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes - CONTENTS 74 Camera Yes Yes Yes Yes Yes Yes - Signal format Shutter Screen size Position Overlay gain Picture reset H-position V-position Phase Frequency Position reset Others Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Color Color Tint R-level G-level B-level Color reset Volume Speaker output Channel select (RCA) Selection Command VCL VTN VLR VLG VLB DRC Increase VLU Decrease VLD On AS1 Off AS0 L+R APA L APL R APR Off LR0 On LR1 L+R AMA L AML R AMR Off LM0 On LM1 DRA PKV PKH DRK English LEN French LFR German LGR Italian LIT Spanish LSP Portuguese LPO Japanese LJP Chinese(Simplified) LPK Chinese(Traditional) LKT Korean LKK Adjustment Analog RGB(1) Digital RGB Command Analog RGB(2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes * Not possible for PAL/SECAM. CONTENTS 75 Audio Loudness (RCA) Channel select (Mini) Loudness (Mini) Audio reset V-keystone H-keystone Keystone reset Language Display Video S-Video Yes Yes * Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Y/PB/PR Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Camera Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Others Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Display Icon (Continued) Menu position On Off Upper left Bottom left Upper right Bottom right Menu translucent On Off Display reset (except keystone) Default setting COMPUTER IN 1 On Off Analog RGB(1) Y/PB/PR COMPUTER IN 2 On Off Analog RGB(2) Digital RGB VIDEO On Off S-VIDEO On Off CAMERA On Off Projection mode Standard Rear Ceiling Rear ceiling No signal background Logo Blue background Non No signal power off Off 5 min. Power on Manual Auto. Input source setting CONTENTS 76 Selection Command MO0 MO1 MP1 MP2 MP3 MP4 MB1 MB0 DRD I10 I11 IS0 IS1 I20 I21 IV0 IV1 I30 I31 I40 I41 I60 I61 PJ0 PJ1 PJ2 PJ3 BG0 BG1 BG2 PN0 PN1 AP0 AP1 Adjustment Analog RGB(1) Digital RGB Command Analog RGB(2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Video S-Video Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Y/PB/PR Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Camera Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Others Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Default setting Startup screen On (Continued) Off Default setting reset Reset Reset all H-reference reset Status display (CALL) Input Toggle selection COMPUTER-1 COMPUTER-2 VIDEO S-VIDEO CAMERA RESIZE Increase the enlargement ratio Decrease the enlargement ratio (Minimum: reset status) Move the enlargement section Up Down Left Right Enlargement reset FREEZE On Off MUTE On Off PIP On Off PIP input source Video S-Video PIP size Small Middle Large PIP position Upper left Upper right Bottom left Bottom right Selection Command MS0 MS1 DRI DRS PKR DON IN0 IN1 IN2 IN3 IN4 IN6 RUP RDW PO1 PO2 PO3 PO4 RS0 FON FOF MON MOF PIN PIF PI0 PI1 PS0 PS1 PS2 PP0 PP1 PP2 PP3 Adjustment Analog RGB(1) Digital RGB Command Analog RGB(2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Video S-Video Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Y/PB/PR Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes - CONTENTS 77 Camera Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes - Others Continued Controlling the projector by using RS-232C (continued) Classification Items/Status PIP PIP audio source (Continued) PIP reset AUTO SET Auto. [. . . ]