User manual TOSHIBA TLP 471

[. . . ] Before use CONTENTS 1 OWNER’S MANUAL 3LCD DATA PROJECTOR TLP450U TLP451U (WITH DOCUMENT IMAGING CAMERA) TLP650U TLP651U (WITH DOCUMENT IMAGING CAMERA) TLP650A TLP651A (WITH DOCUMENT IMAGING CAMERA) TLP470U TLP471U (WITH DOCUMENT IMAGING CAMERA) TLP670U TLP671U (WITH DOCUMENT IMAGING CAMERA) Before use CONTENTS 2 SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. FCC Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. [. . . ] mode : To set the projecting orientation according to the way of installation. RGB input : To set the signal type of RGB input. Video signal : To set the signal type of video input. Scrn display : To use or disable on-screen displays. Save 34 Audio Volume : 33 Save data : To save the adjustments and settings on the menu. All preset : To restore the adjustments and setings on the menu to the factory set. Image 31 To adjust the sound volume of the speaker. Auto sync. Phase : To adjust the phase. Adjustments CONTENTS 28 Initial settings – Default Make the basic settings for projecting. Preparation • Display the image as explained in “Picture Projection”. 21 • Set the POINTER/PJ selector to “PJ”. SELECT/ADJUST ON ON/STANDBY MENU ENTER INPUT LAMP TEMP 2 Press or Language P r o j . mo d e RGB i n p u t to select Eng l i s h S t anda r d RG B . De f a u l t V i deo s i gna l Au t o S c r n d i s p l a y On Proj. mode Confirm your installation type on the chart on page 18 . Standard: Floor-mounted front projection Rear: Floor-mounted rear projection Ceiling: Ceiling-mounted front projection R. ceil. : Ceiling-mounted rear projection RGB input To set the signal type of RGB input. RGB: RGB signal Y/Pb/Pr: Color difference (Component) video signal from the DVD video player, etc. Video signal To set the signal type of video input. Auto: Automatic signal detection works on video input. If it does not properly, set the signal type of the source from the followings. NTSC M: NTSC M signal NTSC443A: NTSC4. 43A signal NTSC J: NTSC J signal NTSC N: NTSC N signal NTSC443B: NTSC4. 43B signal PAL: PAL signal PAL N: PAL N signal SECAM: SECAM signal PAL443: PAL4. 43 signal PAL M: PAL M signal (Continued) 3 Press 4 Press or to select a preferred item. or to make the setting. AUTO SET ON/STANDBY KEYSTONE 2-4 MARKER LASER 1, 5 POINTER PJ L-CLICK R-CLICK MENU RGB ENTER VIDEO CAMERA RESIZE RESET FREEZE RESET To select another item, go back to step 3. Language Select a language for the menu or onscreen displays. English: English Français: French Deutsch: German Italiano : Italian Español : Spanish Português : Portuguese : Japanese 1 Press MENU to display the menu. Ke y s t o n e Au t o s e t Ad j u s t – + Adjustments (Continued) CONTENTS 29 Scrn display On: Off: On-screen displays (indications of input selection, signal absent or mute mode, etc. ) appear. On-screen displays do not appear. 5 Press MENU. The menu disappears. Notes • These settings are stored until you turn the power off. • To store the settings even if the power is turned off, follow the procedure of “Saving data”. [. . . ] (TACP) makes the following limited warranties. These limited warranties extend to the original end-user purchaser. Limited two (2) Years Warranty of Parts and Labor TACP warrants this product and its parts against defects in materials or workmanship for a period of two years after the date of original retail purchase. For a period of two years after the date of original retail purchase, TACP will repair a defective product or a part, without charge to you. This warranty also covers accessories of 3LCD Data Projector. [. . . ]