Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TOSHIBA TRX80. We hope that this TOSHIBA TRX80 user guide will be useful to you.
Lastmanuals help download the user guide TOSHIBA TRX80.
Detailed instructions for use are in the User's Guide.
[. . . ] Move the dish to a programmed, known satellite nearest to the desired new satellite. Locate the Receiver Mode Switch on the receiver back panel. Refer to page 5 of your Owner's Manual. Move the switch to the "PROGRAM" position. [. . . ] Locate the Receiver Mode Switch on the receiver back panel. Refer to page 5 of your Owner's Manual. Move the switch to the "PROGRAM" position. Write down the current Skew Angle number. Use the EAST and WEST keys to run the Skew number all the way down to zero and all the way up to 65. If the picture does NOT come in clear somewhere in this range, set the skew number back to what is was in step 6. d. Press ENTER and put the receiver back in Auto Mode. Locate the Receiver Mode Switch on the receiver back panel. Refer to page 5 of your Owner's Manual. Move the switch to the "AUTO" position. If the picture DOES come in clear somewhere in this range, adjust the skew for the best picture. Select the mode which is correct for your system. The majority of systems are "C & Ku. " If you are not sure, contact your local satellite dealer/installer for assistance. This will clear all the receiver memory. This is necessary only when an Initial Set Up is required. The receiver's memory has been cleared. The on screen displays, "Satellite memory is cleared. Press and hold the EAST key until the screen displays, "No Return Pulse. " To avoid possible damage to the actuator or other out door components, have an assistant near the dish to warn you when the dish is reaching its limit. Release the EAST key when the "No Return Pulse" message is displayed. Press and hold the WEST key for about 1 to 2 seconds. The on screen displays, "Move dish to west limit. " e. Press and hold the WEST key until the screen displays, "No Return Pulse. " Have your assistant watch the dish to avoid any damage as the dish moves towards its western limit. [. . . ] NO CONTACT YOUR SATELLITE DEALER/ INSTALLER.
YES
DONE
7
MISSING SUBSCRIPTION CHANNELS, 2
A From previous page
SNOW OR SCRAMBLED
CHANGE TO A KNOWN ACTIVE FREE CHANNEL ON THIS SATELLITE. IS THE PICTURE GOOD OR SNOW / SCRAMBLED ?
SNOW OR SCRAMBLED
Go to next page B
GOOD
C From next page
IS THIS AN EVEN OR AN ODD NUMBERED CHANNEL ?
EVEN
ODD
CHANGE TO AN EVEN NUMBERED FREE CHANNEL. IS THE PICTURE GOOD ?
CHANGE TO AN ODD NUMBERED FREE CHANNEL. IS THE PICTURE GOOD ?
NO YES YES
NO
RESET THE RECEIVER; UNPLUG THE AC POWER CORD. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA TRX80
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA TRX80 will begin.
