User manual TOSHIBA WL-743

[. . . ] RV74* Digital Series TV74* Digital Series XV74* Digital Series ZV74* Digital Series VL74* Digital Series YL74* Digital Series WL74* Digital Series English Contents INSTALLING YOUR TV Difference List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation and important information . . . . . . . . . . . . . . 6 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] A message will appear, and then press C or c to select Yes and press Q. Easy Setup using PIN (Personal Identification Number) NOTE: If the Dual Band WLAN Adaptor is not connected, Wireless cannot be selected. c If you selected Wired, see "Advanced Network Setup" on page 40. Wireless Setup NOTE: · This feature is grayed out when the Dual Band WLAN Adaptor is not connected or Network Type is set to Wired. · Continued connection of AP (Access Point) is not guaranteed. The connection may be disconnected while watching TV. · Do not remove the Dual Band WLAN Adaptor when Network Type is set to Wireless or wireless communication is active. a b c d e f In the PREFERENCES menu, highlight Network Setup and press Q. Press B or b to highlight Wireless Setup, and press Q. Press B or b to highlight Easy Setup, and press Q. Press b to highlight Start Scan, and press Q. Press B or b to select the desired AP and press Q. NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP. There are 3 methods for Wireless Setup: Easy Setup (WPS) If the AP supports WPS, this method can be used. · WPS (Wi-Fi Protected SetupTM) is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. Assisted Setup (setup by using the AP's notification information) Network Name, Authentication, and Encryption are decided based on information from the AP. Manual Setup (manual input of all settings) g When the PIN code window appears, enter the displayed PIN into your AP, and then press Next to continue the PIN Setup. When a message displays to report that the setup is complete, press Q. 38 CONTROLS AND FEATURES English To cancel searching for the AP: Press RETURN while searching for the AP. A message will appear; then, press C or c to select Yes and press Q. Assisted Setup c Press B or b to highlight Manual Setup, and press Q. Wireless Setup Easy Setup Assisted Setup Manual Setup On a b c In the PREFERENCES menu, highlight Network Setup and press Q. Press B or b to highlight Wireless Setup, and press d e f Press B or b to highlight Network Name, and press Q. The Software Keyboard window will appear. Input the Network Name by using the Software Keyboard (see page 42). To save your setting, press the BLUE button. Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES. [. . . ] They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product. [. . . ]