User manual TOSHIBA ZV-555

[. . . ] ZV55* DIGITAL Series English Contents SETTING UP Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation and important information . . . . . . . . . . . . . . . . . . . . 5 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Inserting batteries and effective range of the remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting external equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting an HDMITM or DVI device to the HDMI input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 To connect an HDMI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To connect a DVI device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 REGZA-LINK connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 To connect a PC to the RGB/PC terminal . . . . . . . . 11 To connect a PC to the HDMI terminal . . . . . . . . . . . . 11 Controls and input connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the controls and connections . . . . . . . . . . . . . . . . 12 Blue screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Side panel adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Picture still . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Other features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Choose the required programme number and if the word Dual appears press s to select Dual 1, Dual 2 or Mono. Bass boost enhances the depth of the sound on the TV speakers. The difference will only be noticeable on sound with a strong bass. a b In the SOUND menu press b to highlight Bass boost. Then press b to highlight Bass boost level and using C or c adjust to suit your preference. Sound controls WOW SOUND OK Off On 70 Stable sound Bass boost Bass boost level 2/2 Volume controls and mute sound Volume Press Y or y to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. MENU Back EXIT Watch TV Bass, Treble and Balance The sound controls are accessible in digital and analogue modes, as are most of the televisions features. When an active Super Woofer is connected to the Woofer Out connection on the back of the television, select AV connection in the SET UP menu, press b to highlight Woofer and using C or c select External. (See 'Input Selection and AV Connections' section). a b In digital mode, press M and using b highlight TV Setup then press Q. Use C or c to select SOUND. 20 CONTROLS AND FEATURES English SRS WOW® sound effects SRS WOW® is a suite of audio effects which use the stereo signals being broadcast to produce enhanced sound from the television's speakers. If mono sound is broadcast only TruBass will be available. SRS® 3D gives a rich sound experience, SRS FOCUSTM concentrates the sound and gives the effect of it coming from the centre of the television, SRS TruBass® enhances the lower bass frequencies. Stable sound® The Stable sound feature limits high volume levels on the TV speakers, preventing the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. a b Select the SOUND menu. Use b to highlight Stable sound then press C or c to select On or Off. a b Press M and select the SOUND menu. Use B or b to highlight WOW then press Q. WOW SRS 3D FOCUS TruBass On Off Off Headphone Mode This setting is used to set the sound output while connecting the headphone. Headphone mode Mode1 Headphone Speakers MENU Back EXIT Watch TV No sound Sound comes out (2 ­ + is available. ) Sound comes out (Headphone level menu is available. ) Sound comes out (2 ­ + is available. ) c d e Press b to highlight SRS 3D and using C or c select between On or Off. Then press b to highlight FOCUS and press C or c to select between On or Off. Highlight TruBass and use C or c to select Off, Low or High to suit your preference. NOTE: This feature is not available through headphones. Mode2 a b In the SOUND menu, press b to highlight Headphone then press C or c to select Mode1 or Mode2. If you select Mode2, then highlight Headphone Level and using C or c to adjust the headphone sound. Dual ­ analogue only If a programme or film is being broadcast with a soundtrack in more than one language, the DUAL feature allows selection between them. SOUND Dual Headphone Dual 1 Mode2 30 0 0 0 EXIT 1/2 a b Press M and select the SOUND menu. Use b to highlight Dual then press C or c to choose between Dual 1 or Dual 2. Headphone Level Bass Treble Balance MENU Back Watch TV WOW, SRS and l symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc. 21 CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press repeatedly to select between 4:3, Super Live 1, Cinema 1, Subtitle, 14:9, Wide, Super Live 2, Cinema 2, Exact Scan and Native. SUPER LIVE 1 This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur. SUPER LIVE 2 If a `side panel format' signal is being received this setting will enlarge the image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur. CINEMA 1 When watching `letterbox format' films/video tapes, this setting will eliminate or reduce the black bars at the top and bottom of the screen by zooming in and selecting the image without distortion. CINEMA 2 When watching `all sides panel format' films/video tapes, this setting will eliminate or reduce the black bars at all sides of the screen by zooming in and selecting the image without distortion. SUBTITLE When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. SUBTITLE 14:9 Use this setting when watching a 14:9 broadcast. 22 CONTROLS AND FEATURES English WIDE Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc. ) black bars may be visible on the top and bottom of the screen. 4:3 Use this setting to view a true 4:3 broadcast. EXACT SCAN Use this setting when watching a 1080 source, it will display the image as transmitted without scaling or cropping the picture. [. . . ] EXT2 OK A VCR Store MENU Back EXIT Watch TV a b Set the Colour to Auto. Go to the Picture settings menu and adjust the tint. 44 INFORMATION English Notes For your own records Cleaning the screen and cabinet. . . Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. [. . . ]