User manual TOYOTA LAND CRUISER-2004

[. . . ] SECTION 1- 1 OPERATION OF INSTRUMENTS AND CONTROLS Overview of instruments and controls Instrument panel overview . 5 Indicator symbols on the instrument panel . 6 1 2004 L/C100 from Aug '03 Prod. (OM60A04U) Instrument panel overview DView A 1. [. . . ] (OM60A04U) Turn the jack joint by hand. To remove: Turn the joint in direction 1 until the jack is free. To store: Turn the joint in direction 2 until the jack is firmly secured to prevent it flying forward during a collision or sudden braking. To remove the spare tire under the luggage compartment: 1. Put a jack handle, jack handle extensions and jack handle end together as shown in the illustration. 1 Jack handle end 2 Jack handle extension 3 Jack handle CAUTION Make sure they are each securely fixed with screws. When connecting a jack handle extension with a jack handle end, use a jack handle to tighten the bolts on the joints as shown in the illustration. When connecting the jack handle with extension, tighten the wing bolt on the joint securely. Make sure the hollow meets the bolt on every joint when you tighten the bolts. NOTICE Tighten all the joints securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. 253 2004 L/C100 from Aug '03 Prod. Remove the access hole cover on the rear bumper with a flat- bladed screwdriver. To protect the paint, place several sheets of paper over the paintwork. 3. Insert the jack handle end into the lowering screw through the access hole and turn it counterclockwise with pushing it to the front lightly. 4. After the tire is lowered completely to the ground, remove the holding bracket as shown in the illustration. 254 2004 L/C100 from Aug '03 Prod. (OM60A04U) --Blocking the wheel --Removing wheel ornament When storing the spare tire, put it in place with the outer side of the wheel facing up and hook the holding bracket as shown in the illustration. Then secure the tire, taking care that the tire goes straight up without catching on any other part, to prevent it from moving during a collision or sudden braking. Check the tire from the side to see that the tire is stored horizontally. 2. Block the wheel diagonally opposite the flat tire to keep the vehicle from rolling when it is jacked up. When blocking the wheel, place a wheel block in front of one of the front wheels or behind one of the rear wheels. 3. Pry off the wheel ornament, using the beveled end of the wheel ornament remover as shown. CAUTION Do not try to pull off the ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. 255 2004 L/C100 from Aug '03 Prod. (OM60A04U) --Loosening wheel nuts CAUTION Never use oil or grease on the bolts or nuts. The nuts may loosen and the wheels may fall off, which could cause a serious accident. --Positioning the jack 4. [. . . ] More than 550 Toyota dealerships now have a TPC, which is an in-dealership parts store offering a wide selection of automotive products. All TPCs feature a complete line of Genuine Toyota maintenance parts and car-care products for do-it-yourselfers. In addition to Toyota maintenance and repair products, TPCs offer free technical advice to Toyota owners who want to service their own vehicles. You'll also find how-to brochures covering most common maintenance jobs. [. . . ]