User manual TOYSINMOTION FLESHLIGHT QUICK ASSEMBLY

[. . . ] Do not attempt to assemble the machine for the first time while in the heat of passion and expect that passion to persist. The machine needs to be ready for action before you are. 1. Open the shipping box and locate all the parts illustrated. [. . . ] Stop it when the shuttle is near the end of the tube with the funnel. Bearing Shu ttle Funnel H US P 8. Now tightly wrap the Velcro strap up and over the screwdriver then down, under, and around the underside of the cradle again. Continue until the excess strap is attached. Owner manual Page 5 11. Hold the broad end of the extension and center the small end up at the bottom of the shuttle applying light force. Rotate the extension until you feel the snap-catches on the extension slip into the grooves in the bottom of the shuttle then push a little harder, and the extension will slide into the shuttle. Finally twist the extension clockwise and you will hear the snapcatches engage. You should not easily be able to pull the extension free from the shuttle. Attach about one inch of the Velcro strap to the Velcro pad on the cradle as indicated. Then pass the strap beneath the cradle, between the cradle and the funnel. Owner manual Page 4 6. Self-adhesive Velcro pad Owner manual Page 11 9. Note the position where the strap passes over the screwdriver or drill. With many screwdrivers that have round profiles and even with some drills, you will want to install the adhesive Velcro pad on the device as indicated. When the attachment strap is wound tightly around as before, it will also engages the Velcro on the device preventing it from moving. If using a drill, remember to tighten the chuck on the hex drive. Rotate and twist 12. Insert the brake into the extension in the Press 15. Slide the short stand-off over Press 17. Activate the power and be certain the Fleshlight moves smoothly and quietly through its entire range of motion. [. . . ] If not already in place, press the comfort ring onto the end of the long stand-off. Tighten Fleshlight 14. Screw the empty Fleshlight case into the extension on top of the vent. Adjust the vent as desired and tighten the Fleshlight quite firmly in the extension. Owner manual Page 8 Owner manual Page 9 Do not use the machine until you have read and understood the precautions in the owners manual. [. . . ]