User manual TP-LINK TD-8610B

[. . . ] Copyright © 2008 TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] If any of the listed items are damaged or missing, please contact with your distributor. CONTENTS Chapter 1. 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product main specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Supporting protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Transmit data-rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ATM property. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 System support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Working environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Electric parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2. 2. 1 2. 2 2. 3 2. 4 Hardware Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Rear-panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware installation procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 3. 3. 1 3. 2 3. 3 3. 4 How to use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Computer Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Software Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Appendix A: Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TD-8610/8610B External ADSL MODEM Chapter 1. Product Overview With the excellent design of circuit and high quality production, we guarantee ADSL2+ MODEM a high performance, very good stability and easy to use. TD-8610/TD-8610B is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices, support Auto-MDIX. TD-8610/TD-8610B not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software too. You can download it from our website (http://www. tp-link. com). 1. 1 Product main specification High speed and asymmetry data transmit mode, adapt to wide-band internet access Point to point connection, provide safe and exclusive bandwidth Support All ADSL industrial standards Advanced DMT modulation and demodulation Firmware upgradeable Compatible with all mainstream DSLAM (CO) Real-time Configuration and device monitoring Quick response semi-conductive surge protect circuit, provides reliable ESD and surge-protect function 1. 2 Supporting protocol - G. 992. 1 (G. dmt) - Annex A/B - G. 992. 2 (G. lite) - Annex A/B - ANSI T1. 413 - G. 992. 3 (ADSL2) - Annex A/B compliant - G. 992. 5 (ADSL2+) Annex A/B compliant - ADSL dual latency (fast path and interleaved path) - I. 432 ATM physical layer compliant -Supports RFC2516 (PPPoE) * - Supports RFC1483 (EoA) ( Bridged) Note: "*"Need third-party software. 1. 3 Transmit data-rate Max download data-rate: 24Mbps 1 TD-8610/8610B Max upload data-rate: 1Mbps Max line length: 6Km External ADSL MODEM 1. 4 ATM property AAL0, AAL5, OAM, RM, and raw cell types supported Direct hardware support for 4 Receive VCs, with additional RX VCs and TX VCs supported in software Full 24-bit Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) 1. 5 System support Support PVC Support IEEE 802. 3IEEE 802. 3u Support 10Base-T/100BASE-TX full-duplex or half duplex Ethernet Support Auto-MDIX 1. 6 Working environment Operating temperature: 0~40 Storage temperature: -40~70 Humidity: 10%90% 1. 7 Electric parameter Adaptor power Output: 9VAC/0. 8A50Hz or 60 Hz Power consumption: 4W Maximum 2 TD-8610/8610B External ADSL MODEM Chapter 2. Hardware Installation Guide 2. 1 System requirement Confirm your computer has been installed with networking interface card (NIC) before connecting ADSL MODEM to your computer, with operating system supporting the TCP/IP protocol. 2. 2 LED explanation The panel of ADSL MODEM includes one power button, one power indicator (RED) and four function indicators (GREEN), and these five indicators are explained as chart 1-1: Name Power On Off On Act Off On Alarm Off Slow flash ADSL Quick flash On Off On LAN Off Flash Status Power OK Power fail There is data transmitting or receiving on WAN port No data transmitting or receiving on WAN port There is a mistake when ADSL is transmitting data or receiving data ADSL normal Self-detecting when power up The LINE port is sending or receiving ADSL data The LINE port has connected to ISP's network The LINE port is disconnected LAN port is normal Connection on LAN port is abnormal Data is transmitting or receiving on LAN port Chart 1-1 Indication 3 TD-8610/8610B External ADSL MODEM 2. 3 Rear-panel ON/OFF: Turn on/off the ADSL modem's power. Power (9VAC/0. 8A input): please do not use any unknown power adaptor, otherwise that may cause damage to your ADSL MODEM. RESET (reset default): When the device is working, please press the reset button of the Modem, keep the reset button pressed down for more than five seconds and then wait for the router to reboot. LAN: Connect with your computer's NIC. LINE (WAN): Connect to the MODEM of Splitter or connect to the telephone line. 2. 4 Hardware installation procedures First Step: Connect the MODEM of Splitter with the LINE port of the TD-8610/TD-8610B ADSL2+ MODEM by telephone line. While you need to use a telephone, please attach telephone line into the phone of Splitter. Second Step: Connect category 5 cable with RJ45 jacks to ADSL MODEM's LAN port and your computer's NIC. Third Step: Link power adapter into the power jack of ADSL MODEM. Please note the range of voltage of power adapter should be within AC 220230V, 50Hz, which will make the MODEM under normal operation. Last Step: Check the line connection to see if everything is ready. [. . . ] (Figure 3-5) Figure 3-5 3. 3 Setup 1) 2) Choose ATM PVCs Configuration (See Figure 3-6) Enter the VPI/VCI value which is provided by your ISP, click Save to finish the configuration. You can press Next to add VPI/VCI value. 8 TD-8610/8610B External ADSL MODEM Figure 3-6 3. 4 Software Dial TD-8610/TD-8610B works in bridged (RFC 1483 Bridged) mode to connect to the Internet. [. . . ]