User manual TP-LINK TD-8800

[. . . ] 2 1. 2 Supporting protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 3 Transmit data-rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 4 ATM property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 5 System support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 15 TD-8800 Ethernet ADSL Router User Guide Package contents The following contents should be found in your box: One TD-8800 Ethernet ADSL Router One AC power Adapter for TD-8800 Ethernet ADSL Router One splitter One RJ11 cable One RJ45 cable One Resource CD for TD-8800 Ethernet ADSL Router, including: · This Guide · ADSL. exe Wall-mounting screws Note:If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TD-8800 Ethernet ADSL Router for assistance. -1- TD-8800 Ethernet ADSL Router User Guide Chapter 1: Product Overview TP-LINK® TD-8800 Ethernet ADSL Router is the latest product designed and manufactured by TP-LINK Technologies Co. , Ltd. With TP-LINK excellent design of circuit and high quality production, we guarantee the Ethernet ADSL Router a high performance, very good stability and easy to use. TD-8800 adopts single chip AFE, insuring you good performance and reliability. TD-8800 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices. TD-8800 can be configured and monitored via html (web mode through Ethernet port), telnet (command line mode through Ethernet port) and external utility software. 1. 1 Product main specification High speed and asymmetric data transmit mode, suitable for high-speed Internet access Point to point connection, provide safe and exclusive bandwidth Support all ADSL industrial standards Advanced DMT modulation and demodulation Firmware upgradeable Compatible with all mainstream DSLAM (CO) Real-time Configuration and device monitoring Quick response semi-conductive surge protect circuit, provides reliable ESD and surge-protect function Easy to configure through the external utility software External Splitter 1. 2 Supporting protocol ANSI T1. 413 I2 ITU G. 992. 1A (G. dmt) G. 992. 2 A (G. lite) G. 994. 1 (G. hs) in ADSL layer. Compliant with ITU-I. 432 and ITU-I. 363 in ATM TC, SAR and AAL5 layers RFC2364 (PPPoA) RFC2516 (PPPoE) RFC1483 (EoA) (support BRIDGED and ROUTED modes) RFC1577 CLASSIC IP over ATM (CLIP) 1. 3 Transmit data-rate Max download data-rate: 8192Kbps Max upload data-rate: 1024Kbps Max line length: 5KM -2- TD-8800 1. 4 ATM property AAL type: AAL5 ATM service type UBR ATM UNI 3. 1, UNI 4. 0* Ethernet ADSL Router User Guide 1. 5 System support UP to 8 PVCs Support NAT, DHCP Server Standard Ethernet interface, true Plug and Play function 1. 6 Working environment Operating temperature: 0°40 Storage temperature: 40°70 Humidity: 10%90% 1. 7 Electric parameter Adapter power: 9V~ 0. 8A Power consumption: 4. 5W Maximum -3- TD-8800 Ethernet ADSL Router User Guide Chapter 2: Hardware Installation Guide 2. 1 System requirement Confirm your computer has been installed with Network Interface Card (NIC) before connecting the Ethernet ADSL Router to your computer, with operating system supporting the TCP/IP protocol. 2. 2 LED explanation The panel of the TD-8800 Ethernet ADSL Router includes one power button, one power indicator (RED) and four function indicators (GREEN), and these five indicators are explained as chart 1-1: Indicator PWR Description Power Status On Off Slow flash Quick flash On On Off Flash Off On Off Chart 1-1 Function Details Power OK Power fail, check the power input The DSL line is down During DSL handshaking The DSL line is up Some error occur In normal operation Data is transmitting on WAN port No data transmitting on WAN port The Ethernet connection is up The Ethernet connection is down ADSL ADSL status ALARM Mistake ACT Data LAN Ethernet 2. 3 Rear-panel Power: Please do not use any unknown power adapter, which may damage your Ethernet ADSL Router. Line port (LINE): Connect to the splitter's MODEM jack for ADSL service. Lan port (LAN): Support 10/100Base-T RJ-45 port, use category 5 cable to connect with your computer's NIC or other 10/100M Ethernet devices, such as switch and router. Reset button (RESET): Push the reset button three times, the router will restore the factory defaults. 2. 4 1. Hardware installation procedures Connect the ADSL line to the splitter's LINE jack, and then Connect the LINE port of the Ethernet ADSL Router to the splitter's MODEM jack using the RJ11 cable . While you need to use a telephone, please attach telephone line into the splitter's PHONE -4- TD-8800 Ethernet ADSL Router User Guide jack. Connect category 5 cable with RJ45 jack to the Ethernet ADSL Router's LAN port and your computer's NIC. Plug one end of the AC Power Adapter into the Power Jack on the Ethernet ADSL Router and the other end to a standard electrical outlet. Check the line connection to see if everything is ready. Power up finally. -5- TD-8800 Ethernet ADSL Router User Guide Chapter 3: Quick Setup 3. 1 1. 2. Computer Configuration Connect the cable according to Chapter 2, turn on the power. Change the IP address of your PC: Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192. 168. 1. * (* is any value between 2 to 254, subnet mask is 255. 255. 255. 0, Gateway is 192. 168. 1. 1, DNS address is the value provided by ISP). Figure 3-1 Note: The users of Windows 98 can open TCP/IP Properties according to the following: Right-press (Mouse) Network Neighbor -> Choose Properties -> Double-press TCP/IP. . The users of Windows 2000/NT/XP can do the following: Right-press Network Neighbor -> Choose Properties -> Right-press Local Connection -> Choose Properties -> Double-press Internet Protocol (TCP/IP). Remarks: you can check whether your configuration is successful through PING command. If the screen likes the following, you succeed. Pinging 192. 168. 1. 1 with 32 bytes of data: Reply from 192. 168. 1. 1: bytes=32 time<10ms TTL-128 -6- TD-8800 Ethernet ADSL Router User Guide . . . If the screen likes the following, you fail. [. . . ] Enter the VPI/VCI value, choose the Capsulation type, press Next. Figure 3-11 3. Enter the IP address, default gateway and subnet mask of WAN. Figure 3-12 4. If you succeed, the SUBMIT SUCCESS screen will appear (See Figure 3-8). Press OK to finish the configuration. - 11 - TD-8800 3. 3. 4 1. [. . . ]