User manual TP-LINK TD-W8901G VERSION 1.0.1

[. . . ] TD-W8901G 54M Wireless ADSL2+ Router Rev: 1. 0. 1 1910010020 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages. · 802. 11 b/g: In the drop-down list you can select "802. 11g (54Mbps)" or "802. 11b (11Mbps)". "802. 11 b+g (54Mbps & 11Mbps)", which allows both 802. 11g and 802. 11b wireless stations to connect to the Router. Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network's RADIUS. · · · · · Active: If you wish to filter users by MAC Address, select "Activated", and "Deactived" for don't. Action: To filter wireless users by MAC Address, select "Allow Association" or "Deny Association" the follow Wireless LAN station(s) association. MAC Address: Enter the MAC Address you wish to filter in the field. SSID Index: The index of the SSID, and in this model, you can only leave it as a default value of 1. SSID: Wireless network name shared among all points in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the same for all stations in your wireless network. Type the desired SSID in the space provided. · Broadcast SSID: When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting. If you don't want to broadcast the Router's SSID, select "No". · Authentication Type: Select an authentication type from the drop-down list, which allows you to configure security features of the wireless LAN interface. Options available are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, and WPA2-PSK. Note: For most users, it is recommended to use the default Wireless LAN Performance settings. Any changes made to these settings may adversely affect your wireless network. Under certain 24 Multiple SSIDs Settings: These are the settings of the SSID. TD-W8901G 54M Wireless ADSL2+ Router User Guide circumstances, changes may benefit performance. [. . . ] User Name/Password: Enter the User Name and Password that provided the ACS server to login the router. Periodic Inform: Activate or deactivate the function. If Activated, the information will be informed to ACS server periodically. Interval: Enter the interval time here. 4. 6 Maintenance Choose "Maintenance", you can see the next submenus: Figure 4-40 Click any of them, and you will be able to configure the corresponding function. 47 TD-W8901G 54M Wireless ADSL2+ Router User Guide 4. 6. 1 Administration Choose "MaintenanceAdministration", you can set new password for admin in the screen (shown in Figure 4-41). Figure 4-41 Note: 1) 2) There is only one account that can access Web-Management interface. [. . . ]