User manual TP-LINK TD-W8960N

[. . . ] TD-W8960N Wireless N ADSL2+ Modem Router Rev: 1. 0. 0 1910010174 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] To restrict other LAN devices, click the Other MAC Address radio-button and enter the MAC address of the other LAN device. Select the day when the rule will take effect in the table. Enter the Start Blocking Time and End Blocking Time in the text box separately, and then the device controlled will then be unable to connect to the internet during that time. Click Save/Apply to save this entry. 4. 6. 42 TD-W8960N 4. 4. 7. 2 URL Filter Wireless N ADSL2+ Modem Router User Guide This section allows you to configure the filter rules based on URL to control the computers in the LAN to access the specified port. Figure 4-39 There are two policies for the URL Filter. Exclude: Block the PCs to access the specified URL. Include: Only allow the PCs to access the specified URL. To add a URL Filter entry for Parental Control rule: 1. Click the Add button and then you will set the new rule in the next screen. Figure 4-40 2. Click Save/Apply to save this entry. Figure 4-41 43 TD-W8960N Wireless N ADSL2+ Modem Router User Guide 4. 4. 8 Quality of Service Choose "Advanced Setup" "Quality of Service", you can enable QoS (Quality of Service) on the screen (shown in Figure 4-42). QoS helps to prioritize data as it enters your router. By attaching special identification marks or headers to incoming packets, QoS determines which queue the packets enter, based priority. This is useful when there are certain types of data you want to give higher priority, such as voice data packets give higher priority than Web data packets. This option will provide better service of selected network traffic over various technologies. Figure 4-42 Select the Enable QoS checkbox to enable all QoS for all interfaces. Select a default DSCP make from drop-down list to automatically mark incoming traffic without reference to a particular classifier. Click Save/Apply to save the current configuration. Note: The default DSCP mark is used to mark all egress packets that do not match any classification rules. 4. 4. 8. 1 Queue Config Choose "Advanced Setup" "Quality of Service" "Queue Config", you can set up virtual servers on the screen below. Figure 4-43 44 TD-W8960N Wireless N ADSL2+ Modem Router User Guide Click the Add button, and you can configure the QoS queue entry on the next screen (shown in Figure 4-44). Figure 4-44 Name: Set a name for the entry. Enable: Select Enable option to take this entry effect. Interface: Assigned a specific Wan Service for this QoS queue entry. Precedence: Specify precedence for this QoS queue entry. DSL Latency: Select latency path for the type of data transmission, only Path0 is available for this Router. [. . . ] SOHO (Small Office/Home Office) - Market segment of professionals who work at home or in small offices. SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is 97 TD-W8960N Wireless N ADSL2+ Modem Router User Guide typically the configuration parameter for a wireless PC card. [. . . ]