User manual TP-LINK TG-3269

[. . . ] When the 1000 LED is lit, it indicates adapter has been linked to network with the right speed of 1000Mbps. The flash 1000 LED indicates data transmission at the responding port. The 10 LED and 100 LED are similar to the 1000 LED. FDX LED Ø Ø Ø Ø Ø Ø Ø Hardware: IBM PC compatibles(It must have PCI slot) IRQ Line: Assigned by system I/O Address: Assigned by system Software: Supports Drivers for NetWare 4. x, 5. x, 6. x, Windows 98, Windows ME, Windows NT, Windows 2000, Windows XP, Linux Temperature: 0 to 40 (Operating) Humidity: 10% to 90% (Non-condensing) Power consumption: 4W(Max) 71030428 User's Guide Appendix C: Contact Information For help with the installation or operation of the TP-LINK TG-3269 Adapter, please contact us. [. . . ] Copyright © 2005 TP-LINK Technologies Co. , Ltd. All rights reserved. Ø Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Thank you for purchasing TP-LINK TG-3269 10/100/1000M Gigabit Ethernet Adapter. This document provides detailed guidelines to install and use the adapter for network installers or users. TG-3269 is a 32-bit PCI 10/100/1000Mbps NWay Gigabit LAN adapter. TG-3269 provides extremely fast data transfer rates up to 2000Mbps at full duplex mode for high bandwidth usage in areas such as network servers, workstations, Storage Area Networks (SANs), Network Attach Storage (NAS) and high-speed video streaming. This manual is divided into two chapters and two appendices. The following summarizes the contents of the chapters and appendices. Ethernet packets to be prioritized from a critical to a non-critical designation through a priority tag. TG-3269 supports Full Duplex operations at 20/200/2000 Mbps data speeds used in conjunction with 802. 3x flow control support. With 802. 3x flow control TG-3269 uses both asymmetric and symmetric functions via the MAC control pause function. Any participating 802. 3x flow control node can be controlled by initiating a pause control to stop incoming network traffic, to further reduce network congestion. By default TG-3269 supports the standard 1518 Byte frame size. In addition, TG-3269 can also be configured to use a maximum Jumbo Frame size of up to 7680Bytes. It includes an interface for a boot ROM and can be used in diskless workstations, providing maximum network security and ease of management. [. . . ] Through the aid of a VLAN membership, TG-3269 adheres to the 802. 1Q for multiple VLAN support, and 802. 1P for packet prioritization. With 802. 1Q support, server resources can be shared with multiple VLANs when used in conjunction with any 802. 1Qenabled Switch. With the 802. 1p support, TG-3269 allows a range of SAFETY NOTICES Caution: Do not use this product near water, for example, in a wet basement or near a swimming pool. [. . . ]