User manual TP-LINK TL-PA6010KIT

[. . . ] TL-PA6010 AV600 Gigabit Powerline Adapter REV1. 0. 0 1910010845 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] On this page, you can also set its network name. 13 TL-PA6010 AV600 Gigabit Powerline Adapter MAC Address: Displays the MAC address of the powerline adapter connected to the current computer where this management utility is running. Network Name: Displays the network name of the current network or you can give a name for the network in which the powerline adapter is. By default, the network name is HomeplugAV. Use Default (HomePlugAV): Check the box before this item to use the default network name. Apply: Click the Apply button to make the setting effective. Password: Displays the password of the current powerline adapter. Every powerline adapter has its own password by default, which can be also found on the back of the adapter. Firmware: Displays the current firmware version used by the adapter. Refresh: Click the Refresh button to update the information. 4. 1. 1 Set Local Device’s Network Name To set the local device’s network name, please take the following steps: (1) Click Status tab to display the Status tab window. (2) Enter a name for the current network using 4~23 characters. Or you can check the Use Default (HomePlugAV) to use the default name as the network name. By default, the network name is HomeplugAV. (3) Click the Apply button to make the settings take effect. 14 TL-PA6010 AV600 Gigabit Powerline Adapter 4. 2 Network The Network tab window shows information of all the powerline adapters found on the current logical network. Furthermore, here you can change the Name of the listed powerline adapters as well as add another device to the current network. Type: Displays the type of the remote device found in the network. Name: Displays the name of the remote device found in the network. You can change its name following two steps: select the desired adapter and click the Modify button. MAC Address: Displays the MAC address of the remote device found in the network. Password: Displays the supplied Powerline Adapter’s password (Initially left blank). To set the Powerline Adapter password (Which is required when creating a private network or managing all the devices), select the device shown in the figure and click the Modify button. Follow the pop-up dialog box to complete your password setting. Rate: Shows the current transmission rate of the Powerline Adapter. [. . . ] The Power LED on both adapters will stop flashing and become solid light when the connection is made. 21 TL-PA6010 AV600 Gigabit Powerline Adapter Join an existing secured Powerline AV Network: Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network. Press and hold the Pair button on Powerline adapter C for one second. Press and hold the Pair button on Powerline adapter A/B for one second. (This step must be taken within 120 seconds after step 1 is finished. ) Wait for about 60 seconds while your Powerline adapters are connecting. [. . . ]