User manual TP-LINK TL-PA7010P

[. . . ] €¢ Our Technical Support contact information can be found at the Contact Technical Support page at http://www. 1 Chapter 1 Get to Know Your Powerline Adapter This chapter introduces what the powerline adapter can do and describes its appearance. TP-LINK powerline adapter aims to extend your exsiting home network, with the help of your home’s electrical circuit. The integrated power socket on the powerline adapter provides an outlet for other electronic devices. [. . . ] 100 0Mb ps Adapter TL-PA7010P 3 100 0Mb ps rli we Po ne Adapter TL-PA7010P 2 Router LA N WA N 1 Done!All powerline adapters share some common factory settings, and can communicate with one another. If you want your powerline adpaters to communicate only with your own powerline adapters, you should pair them. Thus a secured powerline network is formed and other powerline adapters can no longer join your powerline network without being paired. Note: You can only pair two devices at a time. Secure Your Powerline Network by Pairing I want to: Secure my powerline network and prevent other powerline devices from being added to my network. For example, I’ve extended my network using the Plug & Play method. Verify all powerline devices’ Power LEDs Tips: We recommend that you plug in your powerline devices next to each other, or as close to each other as possible when pairing. The devices can be relocated to where they are needed once pairing is complete. Press the Pair button on one of the powerline devices for 1 second. Within two minutes, press the Pair button on another powerline adapter for 1 second. When the Powerline LED stays on, the pairing process is complete. I want to: Add Another Powerline Adapter Add a new powerline adapter into the existing powerline network to extend my network. For example, I’ve already set up a powerline network using powerline devices, but the network does not reach everywhere I need it to. I purchased another one to further extend my network. Plug the new powerline adapter into a wall outlet near one of the existing powerline devices. rli we Po ne 100 0Mb ps 100 0Mb ps 100 0Mb ps 2. Wait for a minute, and check whether the Powerline LED stays on. If it’s not, continue with step 2 to pair the new powerline adapter into the secured powerline network. Press the Pair button on one of the existing powerline devices for 1 second. Within two minutes, press the Pair button on the new powerline adapter for 1 second. When the Powerline LED stays on and solid, the pairing process is complete. [. . . ] Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. cE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. [. . . ]