User manual TP-LINK TL-SC3000

[. . . ] TL-SC3000 3GPP Surveillance Camera Rev:1. 0. 0 1910010104 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] The video type will vary according to the setting of "Stream Format" in the " Total Time " (Address Book) page. Video Type If you've set the video type as MPEG4, you can set the record time of the notification video clip as 1 ~ 5 seconds. If you've set the video type as JPEG, then this option stands for 1 ~ 5 images. 28 TL-SC3000 Note: 3GPP Surveillance Camera If your network camera & mail server are not connected by LAN, and the network connection is not stable or failed, the notification method by Email or FTP might be failed. Sometimes the length of the video clip emailed or uploaded might not be the same as the one you specified in "Total Time". This is because the system can only emailed or uploaded up to 500KB video clip. 5. 4. 2 Network " (Miscellaneous Control) " " (Server Setting) "Network" to go into the "Network" Click " page. In "Network" page, you can set the network configuration of the network camera. Select the network type you will be using for the network camera connection. There are 3 network connection types: Static IP, PPPOE and DHCP. Note: PPPOE and DHCP network connection types are required to apply the DDNS service to get a "Hostname" to correspond to a dynamic IP address. Please refer to "DDNS" section for details. Function Web Port Description Typically, the default TCP port used by HTTP is 80. However, in some cases, it is better to change this port number for added flexibility or security. The valid web port number ranges from 1 to 9999. Computers are communicated and recognized by their own unique IP addresses over the Internet. "Static IP" provided by your ISP (Internet Service Provider) means the IP address of the computer is fixed. Key in the server IP address, gateway and network information provided by your ISP provider to configure a static IP network connection. PPPOE stands for Point-to-Point Protocol over Ethernet. Users can easily have the Internet service as long as they're ready for the following things: 1) Insert an Ethernet card into the PC. 3) Obtain and install the PPPOE software CD. When everything is ready, choose the "PPPOE" IP type, and key in the user name and password provided by your ISP. Then, select "Network" "DDNS" to set DDNS settings. For detailed DDNS settings, please refer to "DDNS" section. 29 Static IP PPPOE TL-SC3000 Function DHCP Description 3GPP Surveillance Camera This DHCP function needs to be supported by a router or cable modem network with the DHCP service. Choose the "DHCP" IP type, and select "Network" "DDNS" to set DDNS settings. [. . . ] With EagleEyes (J2ME New version) installed STEP1: Go to the location where you save the application, and you will see the item "EagleEyes". STEP2: Select "Connect & View" to go to the setting page, similar as follows. Key in the information necessary for DVR or network camera remote access. Select "Connect & View" Create New Connection Set 48 TL-SC3000 1. Host Name Give a name for this connection set. [. . . ]