User manual TP-LINK TL-SF1008D

[. . . ] Copyright © 2008 TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Pink grids represent the area that is not being detected while the transparent grids are the area under detection. You can set multiple areas under detection. Click "" (Select All) to set the whole area under detection. Click "" (Clear All) to set the whole area undetected. After setup, click "Apply" to confirm. In this section, you can select to enable the function of E-mail and/or FTP notification. Item Method Description ·Email If the E-mail notification function is activated, the network camera will send the captured video clip to the assigned E-mail address(s) once motion-trigger or alarm-trigger recording happened. ·FTP If the FTP notification function is activated, the network camera will upload the captured video clip to the specified FTP site once motion-trigger or alarm-trigger recording happened. Display the video type of the notification files. The video type will vary according to the setting of "Stream Format" in the " Total Time " (Address Book) page. Video Type If you've set the video type as MPEG4, you can set the record time of the notification video clip as 1 ~ 5 seconds. If you've set the video type as JPEG, then this option stands for 1 ~ 5 images. 28 TL-SF1008D Note: 3GPP Surveillance Camera If your network camera & mail server are not connected by LAN, and the network connection is not stable or failed, the notification method by Email or FTP might be failed. Sometimes the length of the video clip emailed or uploaded might not be the same as the one you specified in "Total Time". Click " " (Miscellaneous Control) " " (Server Setting) "Network" "DDNS" to enter. DDNS Apply: Under the connection of PPPoE or DHCP, you could key in the domain name which points to the IP address of you DVR to login. However, you need apply for a DDNS account at first. Go to http://www. dyndns. com and sign up a DDNS account. 30 TL-SF1008D 3GPP Surveillance Camera Sign up Enter all the information necessary for signing up an account according to the website instructions. tplinkipcam 1. This name is not equal to the domain name. Key in your E-mail address and input it again to confirm. Set the password and input it again to confirm. 31 TL-SF1008D 3GPP Surveillance Camera 4. Click "Create Account". Then, you will see the screen "Account Created", and Dyndns will email the instructions to your specified E-mail address. Please read this email within 48 hours and complete the procedure to activate your account according to the instructions in the email. Go to the hyperlink in the email and you will see "Account Confirmed". Your account is created successfully now. Input the user name and the password you preset before to log in. Input the user name and the password to login. Click "Add Host Services" 32 TL-SF1008D 3GPP Surveillance Camera tplinkipcam tplinkipcam 1. [. . . ] For PDA, the application will save to "Programs". 8. 2. 2 GPRS / 3G Mobile Phone The setting interface of each mobile phone may vary depending on its individual brand. Therefore, the interface shown below only illustrates the main functions of the application, and is for reference only. For the actual display, please refer to your own mobile phone. [. . . ]