User manual TP-LINK TL-SF1016DS

[. . . ] Copyright © 2009 TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The Dynamic DNS client service provider will give you a password or key. 26 Server name: Choose the DDNS Server from the list. User ID: Enter the user ID for authentication necessary for DDNS connections. Password: Enter the password for authentication necessary for DDNS connections. Re-type password: Re-type the password to confirm. Host name: Enter the host name that is registered to the DDNS server. Note: How to apply DDNS username and Host name?You can apply DDNS username and Host name by the following steps: 1. Log in http://www. dyndns. org, click the Create Account. 27 2. Input all information and follow step by step with DynDNS. . Log in with new account and click Account My Hosts Add Host Services. 28 4. Type domain in the Hostname field and select sub-domain. 5. Note: If you use g-mail as your mail server, you should set 587 as your port number and check SSL box. Authentication: Select the authentication required when you send an email. Off: Select this if no authentication is necessary when an email is sent. On: If authentication is necessary when an e-mail is sent, there are SMPT, POP before SMPT or both three options. SMTP: Select this if SMTP authentication is necessary when an e-mail is sent. POP before SMTP: Select this if POP before SMTP authentication is necessary when an e-mail is sent. If this option is selected, the IP Notification page will be different as following figure shown. 33 POP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. User name, Password: Type the user name and Password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. [. . . ] (Please go to "Setting Advance Schedule Setting") For more details, you can check Section 7. 4. 7. 4 Schedule When you click Schedule on the Advance mode menu, the Schedule setting menu appears. This is the same menu as the setting menu which is displayed when you click Schedule to set Effective period and Schedule in FTP client setting menu, e-Mail (SMTP) setting menu, HTTP Event setting menu and so on. Example: When setting e-Mail (SMTP) (the alarm sending) in the Schedule setting menu. 53 7. 4. 1 Setting Schedule Selection: Select the list box to specify the schedule you want to set. FTP -Alarm FTP - Periodical e-Mail (SMTP) -Alarm e-Mail (SMTP) -Periodical HTTP event -Alarm Mon (Monday) to Sun (Sunday): The time period on the right of the checked day is the effective period of the schedule. [. . . ]